Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall....
For the foregoing reasons, neither Section 904.4.1 nor its exception requires clear counter space at sales and service counters subject to the ADA’s requirements....
Character spacing shall be measured between the two closest points of adjacent characters, excluding word spaces....
The clear tread width of trails must be a minimum of 36 inches (figure 2)....
Where resting intervals are provided adjacent to the trail tread, the resting interval clear width shall be 36 inches (915 mm) minimum....
Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall....
Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall....
E202.4 Functions Located in Maintenance or Monitoring Spaces (Section-by-Section Analysis) This section proposes to revise § 1194.3(f) of the existing 508 Standards to clarify that, where...
Wheelchair spaces complying with Section 11B-802.1 shall be provided in accordance with Table 11B-221.2.1.1....
304.3.2 T-Shaped Space. The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
Maneuvering Space Where Ramps are Provided At least one maneuvering space must be provided on the same level as the play component....
11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats [2010 ADA Standards] 802 Wheelchair Spaces, Companion Seats, and Designated Aisle Seats ...
Series Overview Car Stops are made from 100% recycled plastic. They are maintenance free – withstand traffic, weather and salt. With the solid color throughout, they won’t chip...
[See subsections ...]
The 1991 Standards do not allow an in-swinging door in a toilet or bathing room to overlap the required clear floor space at any accessible fixture....
The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
Section 221.2.1 covers scoping requirements in the current ADA Standards for the number and location of wheelchair spaces.
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
Wheelchair spaces shall be provided complying with Section 11B-221.2.1....
Side Entry Openings, and Width and Length of Wheelchair Space If the wheelchair space can only be entered from the side, the ride must be designed to permit sufficient turning space for...