Character spacing shall be measured between the two closest points of adjacent characters, excluding word spaces....
Search Results "Clear Pier Space"
Filters
Commonly Searched Documents
-
T702.6 Character Spacing
-
R305.1.2 Dome Spacing
R305.1.2 Dome Spacing....
-
11B-1002.5.4 Wheelchair storage space
Wheelchair storage spaces complying with Section 11B-305 shall be provided in or adjacent to unload areas for each required amusement ride seat designed for transfer and shall not overlap...
-
304 Turning Space
[See subsections ...]
-
705.1.2 Dome Spacing
705.1.2 Dome Spacing....
-
3.3.12 180-Degree Turn around a Barrier
3.3.12 180-Degree Turn around a Barrier The U.S. has requirements for a 180-degree turn around a barrier that makes the width of the turn-around space dependent on the width of the passageway...
-
Wheelchair Spaces
Wheelchair Spaces Maneuvering into wheelchair spaces is often easier from the front or back than from the side, especially where they are paired....
-
Alterations and water closet clearances in single-user toilet rooms with in-swinging doors. (Section-by-Section Analysis)
The 1991 Standards do not allow an in-swinging door in a toilet or bathing room to overlap the required clear floor space at any accessible fixture....
-
11B-203.4 Limited access spaces
Spaces not customarily occupied and accessed only by ladders, catwalks, crawl spaces, or very narrow passageways shall not be required to comply with these requirements or to be on an accessible...
-
11B-203.4 Limited access spaces
Spaces not customarily occupied and accessed only by ladders, catwalks, crawl spaces, or very narrow passageways shall not be required to comply with these requirements or to be on an accessible...
-
E202.4 ICT Functions Located in Maintenance or Monitoring Spaces
Where status indicators and operable parts for ICT functions are located in spaces that are frequented only by service personnel for maintenance, repair, or occasional monitoring of equipment...
-
705.1.2 Dome Spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
705.1.2 Dome Spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
Turning Space [1015.4]
A turning space at least 60 inches in diameter or a T-shaped space with an arm at least 60 by 36 inches and a base at least 36 inches wide by 24 inches long (figure 29) must be provided...
-
Combination Wheelchair/Horse Accessible Gates
This corresponds to the minimum required spacing of the stiles for horses to step over them in stride....
-
Wheelchair Spaces, Companion Seats, and Designated Aisle Seats: ADA Standard Section 802
Wheelchair spaces shall comply with 802.1....
-
1009.5.2 Transfer Space
A transfer space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall...
-
11B-809.9.2 Clear width
U-shaped kitchens, with a cooktop, sink or work surface located at the base of the U, that provides knee and toe space complying Sections 11B-809.9.3 and 11B-809.9.4 to allow for a forward...
-
Just Manufacturing Classroom Concealed Ledgemount Teardrop Handles Restricted Swing Faucet
LEAD FREE COMPLIANT - CLASSROOM FAUCETS PVD chrome finish. Classroom faucets feature rigid spouts, or restricted swing spouts, providing preventative measures against wet counter...
-
11B-805.3.1 Wheelchair spaces
Where seating is provided in waiting rooms, at least 5 percent of the seating shall be wheelchair spaces complying with Section 11B-802.1....
-
F244.2.3.2 Parking Spaces
Where provided, parking spaces shall comply with F244.2.3.2....
-
1015.4 Turning Space
A turning space complying with 304.3 shall be provided within viewing areas....
-
1015.4 Turning Space
A turning space complying with 304.3 shall be provided within viewing areas....
-
11B-203.5 Machinery spaces
Spaces frequented only by service personnel for maintenance, repair, or occasional monitoring of equipment shall not be required to comply with these requirements or to be on an accessible...
