[See subsections ...]
Search Results "Work Area Equipment"
Commonly Searched Documents
-
Appendix C to 36 CFR part 1191 – Architectural Barriers Act: Scoping
-
ABA Chapter 2: Scoping Requirements
[See subsections ...]
-
A Longitudinal Study of Playground Surfaces to Evaluate Accessibility - Final Report
A LONGITUDINAL STUDY OF PLAYGROUND SURFACES TO EVALUATE ACCESSIBILITY Final Report October 2013 Staff Liaison Peggy Greenwell U.S. Access Board 1331 F Street,...
-
§ 35.151(i) Curb ramps.
(i) Curb ramps.
- Living Earth Crafts Essex™ Pedicure Chair
-
1. Start with Comprehensive Planning and Site Selection
Start with Comprehensive Planning and Site Selection An economic assessment conducted during the development of accessibility standards for play areas estimated there to be 5,300 new...
-
Additional Number and Types: ADA Standard Section 240.2.1.2
Section 240.2.1.2 covers scoping requirements in the current ADA Standards for additional number and types of ground level play components.
-
11B-240.2.1.2 Additional number and types
50 percent of the elevated play components are connected by a ramp and at least 3 of the elevated play components connected by the ramp are different types of play components, the play area...
-
1009.7.1 Size
Each exterior area for assisted rescue shall be sized to accommodate wheelchair spaces in accordance with Section 1009.6.3....
-
1009.7.1 Size
Each exterior area for assisted rescue shall be sized to accommodate wheelchair spaces in accordance with Section 1009.6.3....
-
F206.7.8 Play Areas
Platform lifts shall be permitted to provide accessible routes to play components or soft contained play structures.
-
206.7.8 Play Areas
Platform lifts shall be permitted to provide accessible routes to play components or soft contained play structures.
- The UpScale Medical Exam Table
- Stable and rock solid. See for yourself!
-
1007.7.3 Size
Each exterior area for assisted rescue shall be sized to accommodate wheelchair spaces in accordance with Section 1007.6.1....
-
M305.2.1 Location
Transfer supports shall comply with M305.2.1.1 or M305.2.1.2 and shall be located 1 ½ inches (38 mm) maximum measured horizontally from the plane defined by the nearest edge of the...
-
M305.2.4 Cross Section
Transfer supports shall have a cross section complying with 305.2.4.1 or 305.2.4.2.
-
M305.2.3 Height
During use, the tops of transfer support gripping surfaces shall be 6 inches (150 mm) minimum and 19 inches (485 mm) maximum higher than the top of the associated uncompressed...
-
M305.2.6 Gripping Surface
Transfer support gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides. The bottoms of transfer support gripping surfaces...
-
5.4.9 Interruptions along Transfer Support Gripping Recommendation for M301 and M302
5.4.9 Interruptions along Transfer Support Gripping Recommendation for M301 and M302 Description: Transfer supports may contain elements to provide structural support or prevent...
-
5.4.2 Transfer Support Length for M301 and M302
5.4.2 Transfer Support Length for M301 and M302 Description: Transfer support length applies to the gripping surface of the support, that portion of the support used to grasp or...
-
5.3 Transfer Sides
5.3 Transfer Sides.
-
5.3 Transfer Sides Recommendations
5.3 Transfer Sides Recommendations
-
M305.2.1 Location
Transfer supports shall be located within reach of the transfer surface and shall not obstruct transfer onto or off of the surface when in position.