member of the advisory committee that recommended the proposed guidelines, but filed a minority report recommending detectable warning surfaces should be required only on curb ramps with slopes...
Search Results "Sloped Sidewalk"
Commonly Searched Documents
-
Comments from Individuals Who Are Blind or Have Low Vision (Section-by-Section Analysis)
-
Recommendations for Future Research
• Additional research would be required to determine the validity and repeatability of the Rotational Penetrometer measurements on surfaces with slopes greater than 5%....
- Whitehall Mfg. WH2142T2 Ligature Resistant Toilet Top Supply On-Floor Wall Waste
- Salsbury Industries See Through Metal Locker Six Tier Box Style 1 Wide
- Salsbury Industries See Through Metal Locker Six Tier Box Style Bridge 16 Box
- Salsbury Industries 66000 Series Six Tier Box Style 1 Wide Standard Metal Lockers
- Salsbury Industries See Through Metal Locker Six Tier Box Style 3 Wide
- Salsbury Industries 66016 Standard Metal Locker Six Tier Box Style Bridge 16 Box 18 Inches Deep
- Salsbury Industries 66000 Series Six Tier Box Style 3 Wide Standard Metal Lockers
- Allegion Von Duprin 94/95 Series INPACT Recessed Exit Device
- Ytterberg Scientific Inc. FloorPro® Floor Flatness Measurement Device
-
11B-303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (12.7 mm) high maximum shall be beveled with a slope not steeper than 1:2. [2010 ADAS] Advisory 303.3 Beveled. ...
-
Thresholds at Doorways
The 1991 Standards and the 2010 Standards require raised thresholds that exceed ¼ inch in height to be beveled on each side with a slope not steeper than 1:2....
-
Clear Deck Space
Clear Deck Space Clear deck space of 60 by 60 inches minimum, with a slope of not more than 1:48, must be provided at the base of a transfer wall....
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space,head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
4(2)
(2) In single-story dwelling units, changes in level within the dwelling unit with heights between 1/4 inch and 1/2 inch are beveled with a slope no greater than 1:2....
-
303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 303.3 Beveled....
-
Outdoor Conditions [4.8.8]
A slope up to 2% is allowed at landings for adequate drainage....
-
4.4.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
Electronic instruments
Originally created to measure the flatness of concrete floors in critical applications such as narrow - aisle warehouses, these devices can be used to measure slope flatness....
-
Three Additional Features for Van-Accessible Parking Spaces
accessible" and the international symbol of accessibility mounted high enough so the sign can be seen when a vehicle is parked in the space 96" min. width access aisle, level (max. slope...
-
5. Grievance Procedure
Initially, the City determined that curb ramps could not be constructed at this location because of a sub-sidewalk basement. RT 2005:2-2006:4; 2421:3-8....
-
Shared Streets
Shared Streets A shared street is a common space designed for use by pedestrians, bicyclists, and vehicles.44 Shared streets typically do not have curbs and delineated sidewalks....
-
Public Rights-of-Way
The guidelines would supplement the ADA and ABA accessibility guidelines by adding new provisions for sidewalks, street crossings, and related pedestrian facilities....