Features: • Slim designed: weight and volume are 30% less than other similar product • Remote control can manage 8 sets of units without interference of each other • Stops at any position...
Search Results "Positioning Support"
-
Automatic Curtain Ltd. Remote Controlled Automatic Roller Shade System I
-
602.5 Spout Location
The spout shall be located 15 inches (380 mm) minimum from the vertical support and 5 inches (125 mm) maximum from the front edge of the unit, including bumpers....
-
602.5 Spout Location
The spout shall be located 15 inches (380 mm) minimum from the vertical support and 5 inches (125 mm) maximum from the front edge of the unit, including bumpers....
-
804.6.2 Operable Parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with 309.3....
-
§382.143(b)(5)
(5) For crewmembers and other personnel whose employment in any given position commences after May 13, 2009, but before May 13, 2010, by May 13, 2010 or a date 60 days after the date of...
-
1630.2(q) Qualification standards
skill, experience, education, physical, medical, safety and other requirements established by a covered entity as requirements which an individual must meet in order to be eligible for the position...
-
804.6.2 Operable Parts
Bottom-hinged appliance doors, when in the open position, shall not be required to comply with 309.3....
-
5.3.3.3 Location Where Walls Not Provided
Where walls or partitions are not provided, the seat shall be positioned in a corner of the clear floor or ground space required by 5.3.2 for a left-hand or right-hand approach. ...
-
5.3.3.3 Location Where Walls Not Provided
Where walls or partitions are not provided, the seat shall be positioned in a corner of the clear floor or ground space required by 5.3.2 for a left-hand or right-hand approach....
-
ALTERATION
As applied to a building or structure, means a change or rearrangement in the structural parts or elements, or in the means of egress or in moving from one location or position to another...
-
§1630.2(q) Qualification standards
skill, experience, education, physical, medical, safety and other requirements established by a covered entity as requirements which an individual must meet in order to be eligible for the position...
-
4.16.4 Grab Bars
Among the various specifications for grab bars in general, including diameter, spacing, and structural strength (ADAAG 4.26) and for toilets in particular, including length and positioning...
-
Toilet and Bathing Rooms
L-shaped seats in transfer and certain roll-in showers have been used for many years to provide users with poor balance additional support because they can position themselves in the corner...
-
2. Shoulder Breadth
Shoulder Breadth Shoulder breadth tends to be slightly greater than hip or thigh breadth and hence was used as an estimate for the width of an examination table when in a reclined position...
-
407.12 Reach Height (Section-by-Section Analysis)
We are proposing to use the term “stationary” to address concerns that the word “freestanding” implies an independent supporting structure that may not always be in place, such as with a...
-
Alterations to cells. (Section-by-Section Analysis)
Only one commenter expressed support for Option I, and a handful of commenters supported Option III. The comments on each option are discussed below....
-
A4.17.3 Size and Arrangement
disabilities who use mobility aids such as walkers, canes or crutches are better able to use the two parallel grab bars in the 36 in (915 mm) wide alternate stall to achieve a standing position...
-
Car Dimensions and Doors: ADA Standard Section 408.4.1
Section 408.4.1 covers the current ADA Standards for the car dimensions and doors of limited-use/limited-application elevators.
-
Gaps: ADA Standard Section 1002.4.3
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
Amusement Ride Seats Designed for Transfer: ADA Standard Section 1002.5
Amusement ride seats designed for transfer shall comply with 1002.5 when positioned for loading and unloading. Advisory 1002.5 Amusement Ride Seats Designed for Transfer....
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading....
-
11B-1002.5 Amusement ride seats designed for transfer
Amusement ride seats designed for transfer shall comply with Section 11B-1002.5 when positioned for loading and unloading....
-
410.6.2 Text Generation (Section-by-Section Analysis)
This proposed section is new to the 508 Standards and 255 Guidelines and would require that, wherever ICT provides real-time voice communication and includes a keyboard, the ICT must also support...
-
601.1 Scope
The technical requirements in Chapter 6 shall apply to ICT support documentation and services where required by 508 Chapter 2 (Scoping Requirements), 255 Chapter 2 (Scoping Requirements)...