Where the surface is paved or is elevated above the natural ground, the cross slope shall not be steeper than 1:48 (2 percent). ...
Search Results "Kitchen Work Surface"
Filters
Commonly Searched Documents
-
7.4.3.2 Cross Slope
-
1008.2.6.2 Use Zones
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition) (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
225.2 Storage
225.2 Storage. Where storage is provided in accessible spaces, at least one of each type shall comply with 811. Advisory 225.2 Storage. Types of storage include, but are not...
-
F225.2 Storage
Where storage is provided in accessible spaces, at least one of each type shall comply with 811. Advisory F225.2 Storage. Types of storage include, but are not limited to,...
-
225.2 Storage
Where storage is provided in accessible spaces, at least one of each type shall comply with 811. Advisory 225.2 Storage. Types of storage include, but are not limited to, closets,...
-
11B-225.2 Storage
Where storage is provided in accessible spaces, at least one of each type shall comply with Section 11B-811. [2010 ADAS] Advisory 225.2 Storage. Types of storage include,...
-
11B-225.2 Storage
Where storage is provided in accessible spaces, at least one of each type shall comply with Section 11B-811. Advisory 11B-225.2 Storage. Types of storage include, but are not...
-
1017.8.3 Slope
Where the surface is other than asphalt, concrete, or boards, slopes not steeper than 1:20 are permitted when necessary for drainage....
-
Avoid the extremes of surface reflectivity and contrast (slides 11 and 13)
We don’t have to have highly reflective surfaces that will still reflect light but spread it, diffuse that light instead of pinpoint reflections....
-
1017.8.3 Slope
EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when necessary for drainage....
-
1017.8.3 Slope
EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when necessary for drainage....
-
Section C: Exterior Route
(§303) C3 Is the route free of surface openings greater than 1/2", such as grates or holes in the pavement?...
-
14. What kinds of reasonable accommodations are related to the benefits and privileges of employment?
Example 21: Karin, who is deaf, works as an associate in a large investment firm....
-
A5.1 General
Dining counters (where there is no service) are typically found in small carry-out restaurants, bakeries, or coffee shops and may only be a narrow eating surface attached to a wall....
-
Handrails Along Walkways
Handrails Along Walkways. The 1991 Standards do not contain any technical requirement for handrails provided along walkways that are not ramps. Section 403.6 of the 2010 Standards...
-
1017.7 Slopes
The slopes of trails shall comply with 1017.7.
-
Slope Ratio
Slope Ratio—A ratio of vertical distance to horizontal distance or rise to run.
-
2. Methodology
[See subsections ...]
-
1017.7 Slopes
The slopes of trails shall comply with 1017.7.
-
6. Acquisition or Modification of Equipment and Devices
Cost $0; A telephone amplifier designed to work with a hearing aid allowed a plant worker to retain his job and avoid transfer to a lower paid job....
-
§100.205(c)(3)
(3) All premises within covered multifamily dwelling units contain the following features of adaptable design:
-
5.4.8 Transfer Support Gripping Surface Hazard for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position
5.4.8 Transfer Support Gripping Surface Hazard for Equipment Used in a Supine, Prone, Side-Lying, or Seated Position....
-
Transfer Surface Height (M301.2.1 and M302.2.1)
surface....
-
904.2 Approach
All portions of counters required to comply with 904 shall be located adjacent to a walking surface complying with 403. Advisory 904.2 Approach....