Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
Search Results "Emergency Warning System"
Filters
Commonly Searched Documents
-
706.2 Receiver Jacks
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
T215 Communication Features
(T215.3.1); and stop request systems (T215.3.3)....
-
§35.135 Personal Devices and Services
This section does not preclude the short-term loan of personal receivers that are part of an assistive listening system....
-
11B-812.3 Floor or ground surfaces
Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted in vehicle spaces and access aisles....
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack. [ECTCR UFAS 4.33.7]...
-
706.2 Receiver Jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
11B-706.2 Receiver jacks
Receivers required for use with an assistive listening system shall include a 1/8 inch (3.2 mm) standard mono jack....
-
1.1 Balance of System (BOS) Equipment
1.1 Balance of System (BOS) Equipment - The BOS equipment, along with the area or enclosure housing it, qualifies for the machinery space and path of travel exceptions as long as the installation...
-
T402.12 Stowage
Where portable ramps and bridgeplates are permitted, a compartment, securement system, or other storage method shall be provided within the non-rail vehicle to stow such ramps and bridgeplates...
-
5.1 Public Notification of Availability
Furthermore, the sign should identify specific frequency employed by the FM or IR system....
-
F207 Accessible Means of Egress
[See subsections ...]
-
11B-216.4 Means of egress
Signs for means of egress shall comply with Section 11B-216.4.
-
11B-207 ACCESSIBLE MEANS OF EGRESS
[See subsections ...]
-
F216.4 Means of Egress
Signs for means of egress shall comply with F216.4.
-
216.4 Means of Egress
Signs for means of egress shall comply with 216.4.
-
g-iii
g-iii. Is there clear maneuvering floor space in front of each accessible door (see ADA Standards § Fig. 25) and, on the pull side, is there at least 18 inches clear floor space...
-
H4
H4. On the pull side of the door, is there at least 18 inches clearance provided on the latch side if the door is not automatic or power-operated? [ADA Standards § 4.13.6, Fig....
-
K4
K4. If built-in food, drink, condiment, and tableware dispensers are provided, are dispensers and operating controls mounted no higher than 54 inches above the floor if clear floor...
-
K3
K3. In each eating area, if tables with fixed seats are provided, do at least 5% of each type of table with fixed seats have accessible locations with knee space at least 27 inches...
-
e-vii
e-vii. Is the elevator equipped with audible tones or bells or verbal annunciators that announce each floor as it is passed? [ADA Standards § 4.10.13] Yes No
-
216.4 Means of Egress
216.4 Means of Egress. Signs for means of egress shall comply with 216.4.
-
M4
M4. On the latch, pull side of the door, is there at least 18 inches clearance provided if the door is not automatic or power operated? [ADA Standards § 4.13.6; Fig....
-
e-v
e-v. Are raised letters and Braille characters used to identify each floor button and each control? [ADA Standards § 4.10.12] Yes No