All of the seating spaces/work surfaces were approximately 42" high....
Search Results "Curb Ramp Surface"
Filters
Commonly Searched Documents
-
High work surface
-
405.7.3 Length
The landing clear length shall be 60 inches (1525 mm) long minimum.
-
11B-405.7.2.1
Top landings shall be 60 inches (1524 mm) wide minimum.
-
405.7.3 Length
The landing clear length shall be 60 inches (1525 mm) long minimum.
-
R407.6.3 Length
R407.6.3 Length. The landing clear length shall be 1.5 m (5.0 ft) long minimum.
-
405.7.3 Length
405.7.3 Length. The landing clear length shall be 60 inches (1525 mm) long minimum.
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum.
-
4.8.4(2)
(2) The landing length shall be a minimum of 60 in (1525 mm) clear.
-
11B-405.7.2.1
Top landings shall be 60 inches (1524 mm) wide minimum.
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum.
-
11B-405.7.3 Length
The landing clear length shall be 60 inches (1524 mm) long minimum.
-
3. Are ramps, transfer systems, and stairs permitted to be counted as play components?
Are ramps, transfer systems, and stairs permitted to be counted as play components? No....
-
EZ-ACCESS Transitions® Angled Entry Mat
Black, Storm Grey and Hazelnut Brown. 100% Recycled Rubber Made with 100% recycled rubber, the Transitions Angled Entry Mat is eco-friendly and can be used safely on nearly any surface...
-
Circular Cross Section and Clearance (§505.5, §505.7)
Circular Cross Section and Clearance (§505.5, §505.7)
-
11B-302.3 Openings
Openings in floor or ground surfaces shall not allow passage of a sphere more than ½ inch (12.7 mm) diameter except as allowed in Sections 11B-407.4.3 _|Platform to Hoistway Clearance|_,...
-
1.1.15 Flatness of ramp landings
1.1.15 Flatness of ramp landings. Measure ramp landings at the midpoints of each landing in each direction using a 24 - in (600 mm) digital inclinometer....
-
f-v
If a ramp is more than 30 feet long, is a level landing at least 60 inches long provided at every 30 feet of horizontal length?...
-
4. Assess During the Planning, Installation and Maintenance Phases
Openings or gaps in the surface cannot exceed a 1/2 inch. Check for changes in level, especially at transiitions [sic] between surfaces....
-
A4.5.3 Carpet
Much more needs to be done in developing both quantitative and qualitative criteria for carpeting (i.e., problems associated with texture and weave need to be studied). However,...
-
Carpet [§302.2]
Carpet [§302.2] Carpet that is thick, cushiony, or loose impairs accessibility, particularly wheelchair maneuvering. The standards specify the maximum pile height (1/2” measured...
-
14) Carpet and carpet tile
14) Carpet and carpet tile ADAAG: Same standards for carpet and carpet tile: maximum pile height of 1/2" (§4.5.3). UFAS: Carpet must have maximum pile height of 1/2". Carpet...
-
M303.2.5 Surfaces (Section-by-Section Analysis)
The MDE NPRM proposed to require diagnostic equipment used by patients seated in a wheelchair to provide a wheelchair space with a surface that does not slope more than 1:48 in any direction...
-
Acceptable SEWF Systems
Because of their reactivity, the stabilizing binders needed to be applied on site or mixed with EWF no longer than 1 h prior to placement on the ground surface....
-
1133A.4.1, Item 4
Finished flooring shall be extended to the wall beneath the sink and work surface....
