NP-JSS is also a UV resistant, VOC-free sealant that protects and helps maintain the natural beauty of most paving surfaces. ...
Search Results "Hybrid Surface System"
-
NanoPave® JSS 2-in-1 Joint Stabilizer and Sealer
-
1013.4 Height
This section requires tent platforms to be 19 inches high maximum measured from the clear ground space to the tent platform surface....
-
1013.4 Height
Tent platforms shall be 19 inches (485 mm) high maximum measured from the clear ground space to the tent platform surface....
-
1013.4 Height
Tent platforms shall be 19 inches (485 mm) high maximum measured from the clear ground space to the tent platform surface....
-
Test Procedures
It has been correlated to the work measurement done in ASTM F1951, Accessibility of Surface Systems, for a wide array of surfacing and floor coverings....
-
The Right to be Rescued
“The Right to be Rescued” is a short documentary that tells the stories of people with disabilities affected by Hurricane Katrina. Released days before the 10th anniversary of the...
-
1.1.3 Walk running slope
primary direction of travel) by determining elevations at the ends of the walk, noticeable changes in slope, or at a maximum of 20 ft (6 m) intervals beginning at one end of the walking surface...
-
Ampetronic CLD1 Compact Small Area & Counter Induction Loop Driver Hearing System
The CLD1 Compact Loop Driver is designed for counter systems and small area perimeter loop systems....
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
MITA Advisory Committee Members
MITA Advisory Committee Members MINORITY REPORT ON TRANSFER SURFACE HEIGHT RECOMMENDATIONS OF THE U.S. ACCESS BOARD ADVISORY COMMITTEE RE: NPRM: M301.2.1 AND M302.2.1 HEIGHT...
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
§ 38.159(b)(6) Platform surface
(6) Platform surface. The platform surface shall be free of any protrusions of 1/4 inch (6.5 mm) high and shall be slip resistant....
-
Alertus Panic Buttons
through other, integrated products—including the Alert Beacon®, Alertus Desktop Notification, LED marquee display, text-to-speech interface for public address and giant outdoor speaker systems...
-
Ampetronic CLD1AC Compact Small Area & Counter Induction Loop Driver Hearing System
The CLD1AC Compact Loop Driver is designed for counter systems and small area perimeter loop systems....
-
T503.3 Steps at Front Doorways
The walking surface on steps serving the front doorway of non-rail vehicles shall be lighted with 2 foot-candles (22 lux) minimum of illumination when the vehicle doors are open....
-
4.26.4 Eliminating Hazards
A handrail or grab bar and any wall or other surface adjacent to it shall be free of any sharp or abrasive elements. Edges shall have a minimum radius of 1/8 in (3.2 mm)....
-
4.26.4 ELIMINATING HAZARDS
A handrail or grab bar and any wall or other surface adjacent to it shall be free of any sharp or abrasive elements. Edges shall have a minimum radius of 1/8 in (3.2 mm)....
-
§ 37.167(b)
(b) On fixed route systems, the entity shall announce stops as follows:...
-
Door King Inc. 1812 Access Plus Communication System
Surface mount dimensions: 6.13"H x 10"W x 5.25"D. Surface curved mount dimensions: 7.38 "H x 10.88"W x 6"D Flush mount dimensions: 9.13"H x 11.88"W x 4.5"D....
-
§ 38.159(c)(2) Ramp surface
(2) Ramp surface....
-
Area of Refuge Identification [IBC §1007.6.5 (2003), §1003.2.13.5.5 (2000)]
Sample Area of Refuge and Exit Sign Areas of refuge are not required in facilities that are equipped throughout with an automated sprinkler systems in compliance with the IBC...
-
1017.7.2 Cross Slope
EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when necessary for drainage....
-
1017.7.2 Cross Slope
EXCEPTION: Where the surface is other than concrete, asphalt, or boards, cross slopes not steeper than 1:20 shall be permitted when necessary for drainage....
