[See subsections ...]
Search Results "Transit Stop"
Commonly Searched Documents
-
11B-209 PASSENGER LOADING ZONES AND BUS STOPS
-
11B-705.1.2.5 Blended transitions
11B-705.1.2.5 Blended transitions. Detectable warnings at blended transitions shall be 36 inches (914 mm) in width....
-
11B-247.1.2.5 Blended transitions
11B-247.1.2.5 Blended transitions. Blended transitions shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.5....
-
§ 37.3 Automated guideway transit system or AGT
Automated guideway transit system or AGT means a fixed-guideway transit system which operates with automated (driverless) individual vehicles or multi-car trains....
- Collapsible Water Retainer Shower Dam for Shower Threshold
-
T215.3. Public Address and Stop Request Systems
Large non-rail vehicles that operate in fixed route service with multiple designated stops shall provide public address and stop request systems in accordance with T215.3....
-
11B-406.5.7 Cross slope
The cross slope of curb ramps and blended transitions shall be 1:48 maximum....
-
11B-406.5.4 Floor or ground surfaces
Floor or ground surfaces of curb ramps and blended transitions shall comply with Section 11B-405.4....
-
11B-812.5.3 Relationship to accessible routes
A curb, wheel stop, bollards, or other barrier shall be provided if required to prevent encroachment of vehicles over the required clear width of adjacent accessible routes....
-
11B-209 Passenger drop-off and loading zones and bus stops.
[See subsections ...]
-
Vertical Clearance: ADA Standard Section 307.4
Section 307.4 covers the current ADA Standards for vertical clearance.
-
11B-307.4 Vertical clearance
Exception: Door closers and door stops shall be permitted to be 78 inches (1981 mm) minimum above the finish floor or ground. ...
-
11B-406 CURB RAMPS, BLENDED TRANSITIONS AND ISLANDS
11B-406 Curb ramps, blended transitions and islands [2010 ADAS] 406 Curb Ramps ETA Editor's Note The differences between 2010 ADAS Section 406 and 2013 CBC Section 11B-406...
-
Common Requirements (R304.5) (Section-by-Section Analysis)
A maximum cross slope of 2 percent is specified for curb ramps, blended transitions, and turning spaces....
-
11B-209 Passenger drop-off and loading zones and bus stops
SECTION TITLE NOTES 11B-209 Passenger drop-off and loading zones and bus stops Amends...
-
11B-206.2.19 Pedestrian street crossings
Where walks or sidewalks are provided, a curb ramp, blended transition, or a combination of curb ramps and blended transitions complying with Section 11B-406 shall connect the walks or sidewalks...
-
Dimensions: ADA Standard Section 810.2.2
Bus stop boarding and alighting areas shall provide a clear length of 96 inches (2440 mm) minimum, measured perpendicular to the curb or vehicle roadway edge, and a clear width of 60 inches...
-
T704.2.1 Audible and visible notification
Audible notifications shall be verbal or non-verbal signals and sound only once for each stop....
-
11B-406 Curb ramps, blended transitions and islands
Parallel curb ramps and blended transitions, although permitted by 2010 ADAS, are not defined or given special attention....
-
11B-406 Curb ramps, blended transitions and islands
Parallel curb ramps and blended transitions, although permitted by 2010 ADA Standards, are not defined or given special attention....
- SafePath VulcanLanding™ Rubber Transition Ramp
-
Requirements to Remember for: Bus Rapid Transit Systems
[See subsections ...]
-
§ 38.173 Automated guideway transit vehicles and systems
[56 FR 45756, Sept. 6, 1991, as amended at 61 FR 25416, May 21, 1996]
-
10.2.2(2)
(2) When new bus route identification signs are installed or old signs are replaced, they shall comply with the requirements of 10.2.1(3).