Visual and audible signals that indicate car position are required. Verbal announcements are acceptable and can substitute for chimes or other audible signals....
Search Results "Signalized Intersection"
Commonly Searched Documents
-
Car Position Indicators [4.10.13]
-
4.10.13* Car Position Indicators
As the car passes or stops at a floor served by the elevators, the corresponding numerals shall illuminate, and an audible signal shall sound....
-
4.10.13* CAR POSITION INDICATORS
As the car passes or stops at a floor served by the elevators, the corresponding numerals shall illuminate, and an audible signal shall sound....
-
Destination-Oriented Elevators
Destination-Oriented Elevators: Call Signals Destination-Oriented Elevators: Car Arrival Other provisions unique to destination-oriented elevators: Elevator Door Requirements...
-
Location
Location Pushbutton-integrated APS rely on relative proximity to the crossing location, not on difference in sounds, to clarify which street crossing is being signaled....
-
Two-way Communication [4.3.11.4]
The two-way communication system must be equipped with both audible signals (for people with vision impairments) and visual signals (for people with hearing impairments) and cannot operate...
-
SENSORY PROVISIONS
., increased amplification, increased signal-to-noise ratio, or combination). For transmitted voice signals, provide a gain adjustable up to a minimum of 20 dB gain....
-
Elevator Door Requirements [§407.3]
Elevator Door Requirements [§407.3]
-
§ 38.173(c)
(c) In stations where open platforms are not protected by platform screens, a suitable device or system shall be provided to prevent, deter or warn individuals from stepping off the...
- Accessible Pittsburgh: Pedestrian Safety
-
e-vii
e-vii. Is the elevator equipped with audible tones or bells or verbal annunciators that announce each floor as it is passed? [ADA Standards § 4.10.13] Yes No
-
5f.
5f. Is the elevator equipped with audible tones or bells or verbal annunciators that announce each floor as it is passed? [ADA Stds 4.10.13]
-
8.4 Recommendations
The signal-to-noise ratio for internally generated noise cannot be less than 18 dB. 4. The peak clipping levels down from the peak cannot be greater than 18 dB....
-
2.2.2.2 New York State Standards
* The minimal signal to noise ratio at the receiver's output should not be less than 35 dB. Harmonic distortion shall not be more than 10%....
-
Audible Tones/Bells or Verbal Annunciators
...are all of the elevators equipped with audible tones/bells or verbal annunciators that designate the passage of floors? [ADA Stds. 4.10.13] Yes __ No __ N/A __ Comments:...
-
Accessible Sidewalks 3: Pedestrians with Low Vision
Requires the Registered User plan or above. Login!
- ElectionSource Wall Mounted Wireless Alert Assist
- Contact Mat (BE9026)
-
Section I: Elevators
(§§407.4.6.1, 308.2, 308.3) I5 Does the elevator have visible and audible signals in the hallway to indicate the arrival and direction of...
- Pushbutton Transmitter (BE1240)
-
Meeting ANSI Standard S12.60 Requirements
To increase the signal-to-noise ratio, and thereby increase speech intelligibility, either the signal must be increased, which is accomplished by increasing good reflections and reducing...
- Step Hear CH-100 Call Unit Service Button
-
8.1 Objective
Minimally acceptable signal-to-noise ratio for internally generated noise, and 4. Minimally acceptable peak clipping level....
-
Communication Access at Doors [§806.3.2, §809.5.5]
communication systems provided at restricted entrances, the Standards include requirements for communication access in transient lodging and residential facilities: visible signals...