The counter surface of check-out aisle counters is required to be 38 inches high maximum. Comments from persons with disabilities considered 38 inches to be too high. Response....
Search Results "Drive Aisle"
Filters
Commonly Searched Documents
-
Check-out Aisle Counter Height
-
Figure 904.3.2 Check-Out Aisle Counters – Drawing from the U.S. Access Board
-
Aisle Ramps in Assembly Areas
In assembly areas, aisle ramps required to be accessible are exempt from some handrail requirements....
-
R310.3 Access Aisle
R310.3 Access Aisle. Passenger loading zones shall provide access aisles complying with R310.3 adjacent to the vehicle pull-up space....
-
11B-217.2 Wheelchair accessible telephones
Exception: Drive-up only public telephones shall not be required to comply with Section 11B-217.2....
-
11B-227.2 Check-out aisles
When check-out aisles are open for customer use, a minimum of one accessible check-out aisle shall always be available. ...
-
11B-227.2 Check-out aisles
[2010 ADAS] 227.2 Check-Out Aisles. Where check-out aisles are provided, check-out aisles complying with 904.3 shall be provided in accordance with Table 227.2....
-
11B-227.2 Check-out aisles
Where check-out aisles are provided, check-out aisles complying with Section 11B-904.3 shall be provided in accordance with Table 11B-227.2....
-
Check-Out Aisles [7.3]
Check-Out Aisles [7.3] Access is required based on facility size and the number of check-outs of each design....
-
11B-904.3.4 Identification sign
When not all check-out aisles are accessible, accessible check-out aisles shall be identified by a sign clearly visible to a person in a wheelchair displaying the International Symbol of...
-
11B-250 Circulation paths
[See subsections ...]
-
Length: ADA Standard Section 503.3.2
Section 503.3.2 covers the current ADA Standards for the required length of access aisles at passenger loading zones.
-
General: ADA Standard Section 904.1
Check-out aisles and sales and service counters shall comply with the applicable requirements of 904....
-
11B-503.3.2 Length
Access aisles shall extend the full length of the vehicle pull-up spaces they serve....
-
Vehicle Spaces: ADA Standard Section 502.2
Section 502.2 covers the current ADA Standards for vehicle spaces.
-
11B-904.1 General
Check-out aisles and sales and service counters shall comply with the applicable requirements of Section 11B-904....
-
Width: ADA Standard Section 503.3.1
Section 503.3.1 covers the current ADA Standards for the required width of access aisles at passenger loading zones.
-
11B-503.3.1 Width
Access aisles serving vehicle pull-up spaces shall be 60 inches (1524 mm) wide minimum....
-
A7.3 Check-out Aisles
Section 7.2 refers to counters without aisles; section 7.3 concerns check-out aisles....
-
How to Measure Access Aisles
In the final rule, the Board has clarified how parking spaces and access aisles are to be measured....
-
1017.2 Aisles in assembly spaces
1017.2 Aisles in assembly spaces. Aisles and aisle accessways serving a room or space used for assembly purposes shall comply with Section 1028....
-
How are parking spaces and access aisles to be marked?
The ADA Standards do not specify the method or color of parking space and access aisle markings. State or local codes and regulations may specify such markings....
-
General: ADA Standard Section 227.1
Section 227.1: General Scoping Requirements for sales and service.
-
General: ADA Standard Section 405.1
Section 405.1 of the ADA Standards covers information in the current ADA Standards for ramps.
