The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
Search Results "Dispersed Seating"
-
11B-1009.2.4 Seat
-
11B-1009.2.4 Seat
The height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the...
-
F233.4.5 Dispersion
dwelling units required to provide mobility features complying with 809.2 through 809.4 and residential dwelling units required to provide communication features complying with 809.5 shall be dispersed...
-
11B-206.7.9 Team or player seating
Platform lifts shall be permitted to provide accessible routes to team or player seating areas serving areas of sport activity. Advisory 11B-206.7.9 Team or player seating....
-
11B-206.7.9 Team or player seating
Platform lifts shall be permitted to provide accessible routes to team or player seating areas serving areas of sport activity. Advisory 11B-206.7.9 Team or player seating....
-
Seat Height: ADA Standard Section 1009.2.4
The height of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the...
-
Seat Width: ADA Standard Section 1009.2.5
The seat shall be 16 inches (405 mm) wide minimum....
-
Amusement Ride Seat
A seat that is built-in or mechanically fastened to an amusement ride intended to be occupied by one or more passengers....
-
233.3.6 Dispersion (Exception 2), F233.3.5 Dispersion (Exception 2), F233.4.6 Dispersion (Exception 2)
233.3.6 Dispersion (Exception 2) F233.3.5 Dispersion (Exception 2) F233.4.6 Dispersion (Exception 2) The final rule adds Exception 2 to these sections....
-
§ 35.151(g) Assembly areas
(g) Assembly areas. Assembly areas subject to the proposed standards shall comply with the provisions applicable to assembly areas, including, but not limited to, sections 221 and...
-
§ 35.151(g) Assembly areas.
(g) Assembly areas. Assembly areas subject to this section shall comply with the provisions of the 2010 Standards applicable to assembly areas, including, but not limited to,...
-
Stadium-Style Movie Theaters
Stadium-Style Movie Theaters Pursuant to 28 CFR 35.151(g) and 36.406(f), in addition to other obligations, stadium-style movie theaters must meet horizontal and vertical dispersion requirements...
-
Dispersion
Dispersion. The 2010 Standards, in section 224.5, set scoping requirements for dispersion in facilities covered by the transient lodging provisions....
-
Dispersion of Cells
Dispersion of Cells. The NPRM did not contain express language addressing dispersion of cells in a facility....
-
Location [4.6.2] and Dispersion
Accessible parking must be dispersed at buildings with multiple accessible entrances (especially important at large facilities such as malls and airports) and should be dispersed among multiple...
-
Seats: ADA Standard Section 608.4
Section 608.4 covers the current ADA Standards for seats in shower compartments.
-
§ 35.151(g)(2)
(2) Wheelchair and companion seating locations are not located on (or obstructed by) temporary platforms or other movable structures. ...
-
Designated Aisle Seats: ADA Standard Section 802.4
Designated aisle seats shall comply with 802.4....
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum....
-
11B-1009.2.5 Seat width
The seat shall be 16 inches (406 mm) wide minimum....
-
General: ADA Standard Section 610.1
Section 610.1 of the ADA Standards covers information in the current ADA Standards for seats in bathtubs and shower compartments.
-
11B-610.1 General
Seats in bathtubs and shower compartments shall comply with Section 11B-610....
-
11B-610.1 General
Seats in bathtubs and shower compartments shall comply with Section 11B-610....
-
4.1.6(4)(f)
(i) In alterations where it is structurally impracticable to disperse seating throughout the assembly area, seating may be located in collected areas as structurally feasible....