Section 410.6 covers the current ADA Standards for the doors and gates of platform lifts.
Search Results "Clear Width"
Filters
Commonly Searched Documents
-
Doors and Gates: ADA Standard Section 410.6
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge BB1260
Five Knuckle - Full Mortise Swing Clear Hinge BB1260 - Ball Bearing - Standard Weight Description: - ANSI A8122 - For square edge doors - Non-rising removable pin with...
-
11B-410.6 Doors and gates
End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge 1260
Five Knuckle - Full Mortise Swing Clear Hinge 1260 - Plain Bearing - Standard Weight Description: - ANSI A8123 - For square edge doors - Non-rising removable pin with...
-
3. Sidewalk Width
3. ...is the usable width of sidewalks at least 36" wide to accommodate wheelchair travel, even if cars project over the curb onto the sidewalk?...
-
Visitability
— The three essential features are one entrance with zero steps; 32 inches or more of clear passage space through interior doors, including bathrooms; and at least a half bathroom on...
-
Seat Width: ADA Standard Section 1009.2.5
The seat shall be 16 inches (405 mm) wide minimum.
-
Stanley FBB 248 Standard Weight Ball Bearing “Swing Clear” Full Mortise Offset Door Hinge
FBB248 and STSFBB248 for full mortise application on square edge doors Specify FBB258 and STSFBB258 for full mortise application on bevel edge doors Designed to swing doors completely clear...
-
3.3.10 90-Degree Turn
The width required for all participants to complete a 90-degree turn in our sample was much smaller than the UDI findings (Figure 3‒10), due to differences in the abilities of people or/...
-
180 Turns Around Obstructions
The clear width must be at least 48” at the turn and 42” minimum approaching the turn (unless the clear width at the turn is 60” minimum)....
-
A4.2.1(1) Space Requirements for Wheelchairs
Most wheelchair users need a 30 in (760 mm) clear opening width for doorways, gates, and the like, when the latter are entered head-on....
-
A4.2.1(1) Space Requirements for Wheelchairs
Many persons who use wheelchairs need a 30 in (760 mm) clear opening width for doorways, gates, and the like, when the latter are entered head-on....
-
Clear Floor or Ground Space: ADA Standard Section 305
Section 305 covers the current ADA Standards for clear floor or ground space.
-
11B-403.5.1 Clear width
The clear width for sidewalks and walks shall be 48 inches (1219 mm) minimum....
-
11B-403.5.1 Clear width
The clear width for sidewalks and walks shall be 48 inches (1219 mm) minimum....
-
11B-403.5.1 Clear width
The clear width for sidewalks and walks shall be 48 inches (1219 mm) minimum....
-
Clearance
The minimum width of exterior routes on public streets and sidewalks will likely be revisited in supplementary guidelines specific to public rights-of-ways that the Board intends to develop...
-
Clear Tread Width and Passing Spaces for Outdoor Recreation Access Routes
Clear tread width means the width of the traveled surface on the ground and also above the ground between obstacles (figure 40)....
-
Width: ADA Standard Section 502.3.1
Section 502.3.1 covers the current ADA Standards for the required width of access aisles.
-
Clear Floor or Ground Space: ADA Standard Section 407.2.1.3
Section 407.2.1.3 covers the current ADA Standards for the clear floor or ground space at elevator call controls.
-
Clear Floor Space: ADA Standard Section 410.3
Section 410.3 covers the current ADA Standards for clear floor space in platform lifts.
-
4.3.5.3 180-degree turn around an obstacle
The current ADA-ABA standard for the space needed to complete maneuver is based on the width of the entry aisle and the width of the intervening obstacle, e.g. shelving....
-
4.3.5.2 180-degree turn
Figure 4-5: Accommodation model depicting the minimum clear width required by users of manual wheelchairs, powered chairs and scooters to complete a 180-degree turn....
-
11B-406.5.3 Landings
The landing clear length shall be 48 inches (1219 mm) minimum....
