Section 226.2 covers scoping requirements in the current ADA Standards for dispersion of dining surfaces and work surfaces.
Search Results "Adult Changing Table"
Filters
Commonly Searched Documents
-
Dispersion: ADA Standard Section 226.2
-
11B-226.2 Dispersion
Dining surfaces required to comply with Section 11B-902 shall be dispersed throughout the space or facility containing dining surfaces for each type of seating in a functional area....
-
11B-102 Dimensions for adults and children
The technical requirements are based on adult dimensions and anthropometrics....
-
Beveled: ADA Standard Section 303.3
Section 303.3 covers the current ADA Standards for beveled level changes.
-
11B-303.3 Beveled
A change in level of 1/2 inch (13 mm) is permitted to be 1/4 inch (6.4 mm) vertical plus 1/4 inch (6.4 mm) beveled....
-
11B-303.2 Vertical
Changes in level of ¼ inch (6.4 mm) high maximum shall be permitted to be vertical and without edge treatment. [2010 ADA Standards] 303.2 Vertical....
-
Fixtures
For purposes of compliance with TAS 604.3.2, the reference to “fixture” shall mean the plumbing fixtures identified in TAS 213.3 and baby changing tables which are identified as convenience...
-
11B-603.5 Accessories
Exception: Baby changing tables are not required to comply with Section 11B-603.5....
-
11B-603.5 Accessories
Exception: Baby changing tables are not required to comply with Section 11B-603.5....
-
Vertical: ADA Standard Section 303.2
Section 303.2 covers the current ADA Standards for vertical changes in level.
-
Ramps: ADA Standard Section 303.4
Section 303.4 covers the current ADA Standards for changes in level that must be ramped due to being greater than 1/2 inch.
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
309.3 Baby Changing Table Pull Down Handle Height
-
4.32.4* Height of Tables or Counters
The tops of accessible tables and counters shall be from 28 in to 34 in (710 mm to 865 mm) above the finish floor or ground....
-
Dining Surfaces and Work Surfaces for Children's Use: ADA Standard Section 902.4
Accessible dining surfaces and work surfaces for children’s use shall comply with 902.4. EXCEPTION: Dining surfaces and work surfaces that are used primarily by children 5 years...
-
11B-902.4 Dining surfaces and work surfaces for children’s use
Accessible dining surfaces and work surfaces for children’s use shall comply with Section 11B-902.4. Exception: Dining surfaces and work surfaces that are used primarily by...
-
Height of Tables or Counters [4.32.4]
Height of Tables or Counters [4.32.4] Counter and table surface heights (28 to 34 inches) should be specified in consideration of the intended use....
-
303 Changes in Level
303 Changes in Level...
-
11B-703.8.14 Rate of change
Where a VMS message can be displayed in its entirety on a single screen, it shall be displayed on a single screen and shall remain motionless on the screen for a minimum 3 seconds or...
-
Fixed Seating and Tables
Fixed Seating and Tables If tables are provided, such as in restaurants and snack bars, and the tables are attached to the wall or floor (fixed), then 5% of the tables or at least one...
-
11B-809.7.2 Changes in level
Changes in level shall comply with Sections 11B-303.2 and 11B-303.3....
-
Fixed or Built-in Seating and Tables [4.32]
[See subsections ...]
-
A4.32 SEATING, TABLES, AND WORK SURFACES
[See subsections ...]
-
4.32 SEATING, TABLES, AND WORK SURFACES
[See subsections ...]
