A curb or barrier shall be provided that prevents the passage of a 4-inch (102 mm) diameter sphere, where any portion of the sphere is within 4 inches (102 mm) of the finish floor or ground...
Search Results "Teeing Ground"
2010 ADA Definition
Teeing Ground: In golf, the starting place for the hole to be played.
Filters
Commonly Searched Documents
-
11B-405.9.2 Curb or barrier
-
11B-404.3.5 Controls
A level and clear floor or ground space for forward or parallel approach complying with Section 11B-305 should be provided, centered on the operating device....
-
Structured Negotiation: A Winning Alternative to Lawsuits
This is Structured Negotiation, the collaborative dispute resolution method described in this ground-breaking book....
-
Fire Rings, Grills, Fireplaces, and Wood Stoves
The slope of the clear floor or ground space must not exceed 1:48 (2 percent) in any direction....
-
American Specialties Angle Frame Mirror 0600
3/4" x 5/8" (19 x 16 mm) roll formed 18 gauge type 304 stainless steel angle has corners heliarc welded, ground and polished smooth to a uniform satin finish....
-
Magnuson Group FUM Ashtrays
Can be secured to the ground. White or Black. Suitable for outdoor use....
-
11B-605.3 Clear floor space
A clear floor or ground space complying with Section 11B-305 positioned for forward approach shall be provided....
-
4.33.2* Size of Wheelchair Locations
Each wheelchair location shall provide minimum clear ground or floor spaces as shown in Fig. 46....
-
1011.8 Viewing Scopes
This section requires eyepieces on viewing scopes to be 43 inches minimum and 51 inches maximum above the ground....
-
4.33.2* SIZE OF WHEELCHAIR LOCATIONS
Each wheelchair location shall provide minimum clear ground or floor spaces as shown in Fig. 46....
-
11B-605.3 Clear floor space
A clear floor or ground space complying with Section 11B-305 positioned for forward approach shall be provided....
-
404.2.3 Clear Width
There shall be no projections into the required clear opening width lower than 34 inches (865 mm) above the finish floor or ground....
-
11B-404.2.3 Clear width
There shall be no projections into the required clear opening width lower than 34 inches (864 mm) above the finish floor or ground....
-
404.2.3 Clear Width
There shall be no projections into the required clear opening width lower than 34 inches (865 mm) above the finish floor or ground....
-
Telescopes and Periscopes
Whenever a telescope or periscope is provided, ensure that a separate telescope or periscope is available for use from a standing position (60 inches above the floor or ground surface is...
-
605.3 Clear Floor Space
A clear floor or ground space complying with 305 positioned for forward approach shall be provided. [ECTCR UFAS 4.18.3]...
-
§ 37.169(c)
(c) Requests for modification of a public entity's policies and practices may be denied only on one or more of the following grounds:...
-
§ 37.169(c)
(c) Requests for modification of a public entity's policies and practices may be denied only on one or more of the following grounds:...
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
permitted to protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum above the floor or ground...
-
4.4.1 General
In alterations, where a condition for exception in section 1.1 prohibits full compliance with a specific requirement for clear floor or ground space surface, slope, size, or location, the...
-
Picnic Tables
In addition to the clear floor or ground space for each wheelchair seating space, provide a 48-inch (1,220-millimeter) clear floor or ground space around the usable portions of the table...
-
Parking sign height measurement technique
502.6 says "Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign." But which floor or ground surface? ...
-
Utilities at Recreation Sites
size, or location), the clear floor or ground space only has to comply with requirements to the extent practicable....
-
Section 2. Finished grade
"Finished grade" means the ground surface of the site after all construction, levelling, grading, and development has been completed....
