Swing-up grab bar shall be manually raised for approach or departure and lowered to horizontal position for support; counterweighted design shall prevent grab bar from falling back down...
Search Results "Raised Circulation Path"
Filters
Commonly Searched Documents
-
Bobrick Swing-Up Grab Bar B-4998.99
-
General [5.1]/ Access Aisles [5.3]
Space should also be available so that people using wheelchairs do not obstruct required exit and circulation routes....
-
Amusement Ride Seats Designed for Transfer: ADA Standard Section 1002.5
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer....
-
11B-1002.5 Amusement ride seats designed for transfer
Where greater distances are required for transfers, providing gripping surfaces, seat padding, and avoiding sharp objects in the path of transfer will facilitate the transfer. ◼...
-
Boarding platform
A platform in a level boarding bus system raised above standard curb height in order to align vertically with the transit vehicle entry for level boarding and alighting....
-
11B-411.4.7.3 Symbols
The control button for the emergency stop, alarm, door open, door close, and phone, shall be identified with raised symbols and Braille as shown in Table 11B-407.4.7.1.3....
-
11B-411.4.7.3 Symbols
The control button for the emergency stop, alarm, door open, door close, and phone, shall be identified with raised symbols and Braille as shown in Table 11B-407.4.7.1.3....
-
11B-411.4.7.3 Symbols
The control button for the emergency stop, alarm, door open, door close, and phone, shall be identified with raised symbols and Braille as shown in Table 11B-407.4.7.1.3....
-
Trail Facilities
The path of travel between trail facilities, as well as the path connecting them to a trail, must comply with FSTAG....
-
11B-411.2.1.2.3 Accessibility function button
The accessibility function button shall be identified by the International Symbol of Accessibility and a raised indication....
-
MEANS OF EGRESS
A continuous and unobstructed path of vertical and horizontal egress travel from any occupied portion of a building or structure to a public way....
-
§ 38.123(b)
be in close proximity to at least one seating location for persons using mobility aids complying with §38.125(d) of this part and shall be connected to such a space by an unobstructed path...
-
Kohler Dynametric® 60" x 32" Alcove Bath
Dynametric® Combining KOHLER styling and functionality, the Dynametric 5' bath includes an integral apron for easy installation and a raised bath bottom that allows use of a horizontal...
-
NABCO GT1400 / Automatic Standard Folding Door
The speed at which the GT1400 Folding Door opens and closes can be adjusted, and the NABCO finger guard prevents small objects from being caught in the door’s path....
-
SuperDeck Nature Trail
Superdeck, The Natural Choice Equally at home in wetlands, bogs, sand dunes, and marshes, Superdeck provides an excellent base for observation decks, marsh walkways and bog paths, especially...
-
SafePath EZCurb™ Wheelchair Ramps - Vertical Barrier Removal
EZCurbTM Ramps are designed to provide ramped access and vertical barrier removal where there is a single path-of-travel requirement....
-
Check Braille
Check Braille Confirm that braille dots are raised to the touch....
-
Car Controls
...are the highest floor control buttons in the elevator(s) mounted within 54" of the floor, with associated raised letters and Braille characters?...
-
5.4 Dining Areas
In new construction, all dining areas, including raised or sunken dining areas, loggias, and outdoor seating areas, shall be accessible....
-
11B-411.2.1.2.3 Accessibility function button
The accessibility function button shall be identified by the International Symbol of Accessibility and a raised indication....
-
11B-1009.2.4 Seat
height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the raised...
-
11B-1009.2.4 Seat
height of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the raised...
-
PURPOSE
PURPOSE: To provide guidance on the required information to be shown on construction documents submitted to the Division of the State Architect (DSA) for path of travel upgrades required...
-
Food and Beverage Service
The Food Service: Accommodating Diners with Disabilities factsheet provides both legal standards and promising practices for paths of travel, approach to dining spaces, seating, dining...
