§703.2 Raised Characters. Raised characters shall comply with 703.2 and shall be duplicated in Braille complying with 703.3....
Search Results "Raised Circulation Path"
-
ETA Opinion: ADA Signage at Exit Doors
-
11B-703.6 Pictograms
Pictograms and other symbols, such as the International Symbol of Accessibility (ISA), which are included on signs with raised characters and Braille are not required to be raised....
-
Use Zone
beneath and immediately adjacent to a play structure or play equipment that is designated by ASTM F 1487 (incorporated by reference, see "Referenced Standards" in Chapter 1) for unrestricted circulation...
-
Hager Companies Plastic International Symbol 364M
Plastic International Symbol 364M Material: - .0625'' (2 mm) thick plastic raised symbol Size: - 4" x 4" (102 mm x 102 mm) Fasteners: - Double-sided pressure sensitive...
-
Hager Companies Plastic International Symbol 364S
Plastic International Symbol 364S Material: - .0625'' (2 mm) thick plastic raised symbol Size: - 3" x 3" (102 mm x 102 mm) Fasteners: - Double-sided pressure sensitive...
-
220 Automatic Teller Machines and Fare Machines
Where the circulation path does not coincide with that used by the general public, accessible fare collection systems shall be located at or adjacent to the accessible point of entry or...
-
Use Zone
to a play structure or piece of equipment that is designated by ASTM F 1487 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use for unrestricted circulation...
-
4.34.2(9)
If air distribution registers must be placed in or close to ceilings for proper air circulation, this specification shall not apply to the registers....
-
11B-703.7 Symbols of accessibility
Symbols of accessibility, such as the International Symbol of Accessibility (ISA), which are included on signs with raised characters and Braille are not required to be raised....
-
§ 38.25(c) Door height
For vehicles in excess of 22 feet in length, the overhead clearance between the top of the door opening and the raised lift platform, or highest point of a ramp, shall be a minimum of 68...
-
Mounting Height and Location
The proposed rule specified a range of height of 48 to 60 inches for raised characters and a range of 40 to 60 inches for braille....
-
"Wheelchair" (Section-by-Section Analysis)
"Typical indoor and outdoor pedestrian areas" refer to locations and surfaces used by and intended for pedestrians, including sidewalks, paved paths, floors of buildings, elevators, and...
-
"Wheelchair" (Section-by-Section Analysis)
"Typical indoor and outdoor pedestrian areas" refer to locations and surfaces used by and intended for pedestrians, including sidewalks, paved paths, floors of buildings, elevators, and...
-
Marked Crossing
A crosswalk or other identified path intended for pedestrian use in crossing a vehicular way....
-
Marked Crossing
A crosswalk or other identified path intended for pedestrian use in crossing a vehicular way....
-
MARKED CROSSING
A crosswalk or other identified path intended for pedestrian use in crossing a vehicular way....
-
MARKED CROSSING
A crosswalk or other identified path intended for pedestrian use in crossing a vehicular way....
-
MARKED CROSSING
A crosswalk or other identified path intended for pedestrian use in crossing a vehicular way....
-
106.5.36 Marked Crossing
A crosswalk or other identified path intended for pedestrian use in crossing a vehicular way....
-
11B-206.2.1 Site arrival points
General circulation paths shall be permitted when located in close proximity to an accessible route. Advisory 11B-206.2.1 Site arrival points....
-
Gangway Alterations
However, if the areas altered contain primary functions (such as a boat slip or boat dock), existing gangways are considered part of the path of travel to the altered primary function area...
-
II-6.6000 Curb ramps
When streets, roads, or highways are newly built or altered, they must have ramps or sloped areas wherever there are curbs or other barriers to entry from a sidewalk or path....
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
