Exterior walls separating the exterior area of assisted rescue from the interior of the building shall have a minimum fire-resistance rating of 1 hour, rated for exposure to fire from the...
Search Results "Interior Design"
-
1009.7.2 Separation
-
Work Areas [4.1.1(3)]
., designed so that certain elements can be added or altered for access after construction)....
- Acoustical Society of America - American National Standard Acoustical Performance Criteria, Design Requirements, and Guidelines for Schools, Part 2: Relocatable Classroom Factors
-
§382.61(e)
(e) You are not required to retrofit cabin interiors of existing aircraft to comply with the requirements of this section....
-
F228.2 Mail Boxes
Where mail boxes are provided in an interior location, at least 5 percent, but no fewer than one, of each type shall comply with 309....
-
Entrance
definition of "entrance" has been revised in the final Guidelines to clarify this point, and the term "entry" is used instead of "entrance" when referring to the entry into a unit when it is interior...
-
Maneuvering Clearances [§404.2.4]
Such doors are usually wider to accommodate beds and gurneys, and they are often located close to adjacent interior walls to facilitate circulation and to enhance privacy. ...
-
228.2 Mail Boxes
Where mail boxes are provided in an interior location, at least 5 percent, but no fewer than one, of each type shall comply with 309....
- HEWI System 100 Door Hardware
-
Attachment J: Access to Humboldt County Programs Housed in Others’ Facilities
Attachment J: Access to Humboldt County Programs Housed in Others’ Facilities
-
PATH OF TRAVEL
(A) An accessible path of travel may consist of walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms, and...
-
PATH OF TRAVEL
(A) An accessible path of travel may consist of walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps; clear floor paths through lobbies, corridors, rooms, and...
-
C. FINDINGS BY THE UNITED STATES
Examples of the Museum's failure to remove architectural barriers in existing facilities included: no accessible seating in the Café; the force required to push or pull open the interior...
-
Panel 2: Existing Standards and Design Guidance (Tom O. Sachs, AIA, Moderator)
Note: Transcripts for this Panel were not available. The Proceedings from this Panel are based on notes by JEW and TOS)
-
§100.306 Intent to operate as housing designed for persons who are 55 years of age or older.
(Approved by the Office of Management and Budget under control number 2529-0046) [64 FR 16330, Apr. 2, 1999]
-
Taking Photographs
It is a good idea to take several photos of the exterior and interior of the polling place. We recommend taking photographs of measurements and noncompliant elements such as steps....
-
Accessible Route
Interior accessible routes may include corridors, floors, ramps, elevators, lifts, and clear floor space at fixtures....
-
4(6)
units with direct exterior access, outside landing surfaces constructed of impervious materials such as concrete, brick or flagstone, are no more than 1/2 inch below the floor level of the interior...
-
1132A.4, Item 4
., concrete, brick, flagstone) may have a maximum change in height from the interior landing of 1 inch (25.4 mm), provided a ramp with a maximum slope of 1:8 is permanently installed....
-
Wheelchair Access
Wheelchair Access A wheelchair accessible public phone is required at all interior and exterior pay phone "banks" (i.e., two or more adjacent phones)....
-
1132A.4.1 Thresholds
Changes in height at interior door thresholds (e.g., floor material changes at door thresholds) shall not exceed ½ inch (12.7 mm). Thresholds shall comply with the following:...
-
228.2 Mail Boxes
Where mail boxes are provided in an interior location, at least 5 percent, but no fewer than one, of each type shall comply with 309....
-
Contrast
The proposed rule specified that detectable warnings in interior locations differ from adjoining walking surfaces in resiliency or sound-on-cane contact (705.2.3)....
-
11B-404.2.4.3 Recessed doors and gates
Maneuvering clearances for forward approach shall be provided when any obstruction within 18 inches (457 mm) of the latch side at an interior doorway, or within 24 inches (610 mm) of the...