[See subsections ...]
Search Results "Transfer Seat (Transportation)"
-
Requirements to Remember for: Alterations or Additions to Facilities
-
Limitations on Accommodations
Limitations on Accommodations Carrier personnel are expressly prohibited from performing certain tasks. For example, carrier personnel cannot physically hand-carry you on or off...
-
Other Definitions
The DOJ published, on September 15, 2010, new ADA Title II and Title III regulations (75 FR 56164). These rules define certain terms, such as “disability,” “auxiliary aids” and...
-
Appendix E to Part 37—Reasonable Modification Requests
[See subsections ...]
-
11B-810.1.1 Vehicle boarding
Stations shall not be designed or constructed so as to require persons with disabilities to board or alight from a vehicle at a location other than one used by the general public.
-
11B-810.8 Clocks
Where clocks are provided for use by the public, the clock face shall be uncluttered so that its elements are clearly visible. Hands, numerals and digits shall contrast with the...
-
§ 38.23(d) Securement devices
(d) Securement devices—
-
§ 38.23(d)(5) Movement
(5) Movement. When the wheelchair or mobility aid is secured in accordance with manufacturer's instructions, the securement system shall limit the movement of an occupied wheelchair...
-
§ 38.179 Trams, and similar vehicles, and systems
[See subsections ...]
-
11B-810.8 Clocks
Where clocks are provided for use by the public, the clock face shall be uncluttered so that its elements are clearly visible. Hands, numerals and digits shall contrast with the...
-
11B-810.1.1 Vehicle boarding
Stations shall not be designed or constructed so as to require persons with disabilities to board or alight from a vehicle at a location other than one used by the general public.
-
810.8 Clocks
810.8 Clocks. Where clocks are provided for use by the public, the clock face shall be uncluttered so that its elements are clearly visible. Hands, numerals and digits shall contrast...
-
810.8 Clocks
Where clocks are provided for use by the public, the clock face shall be uncluttered so that its elements are clearly visible. Hands, numerals and digits shall contrast with the...
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
§ 36.308 Seating in assembly areas.
A public accommodation shall ensure that wheelchair spaces and companion seats are provided in each specialty seating area that provides spectators with distinct services or amenities that...
- Access Board: Bathtubs
-
Horizontal Dispersion: ADA Standard Section 221.2.3.1
Section 221.2.3.1 covers scoping requirements in the current ADA Standards for horizontal Dispersion in assembly areas.
-
Section 36.308 Seating in Assembly Areas (Section-By-Section Analysis and Response to Comments)
In order to facilitate seating of wheelchair users who wish to transfer to existing seating, paragraph (a)(1) of the final rule adds a requirement that, to the extent readily achievable,...
-
§ 35.138(c) Identification of accessible seating
(c) Identification of accessible seating....
-
11B-221.2 Wheelchair spaces
Wheelchair spaces complying with Section 11B-221.2 shall be provided in assembly areas with fixed seating....
-
11B-221.2 Wheelchair spaces
Wheelchair spaces complying with Section 11B-221.2 shall be provided in assembly areas with fixed seating....
-
§382.85 What seating accommodations must carriers make to passengers in circumstances not covered by §382.81 (a) through (d)?
As a carrier, you must provide the following seating accommodations to a passenger who self-identifies as having a disability other than one in the four categories listed in §382.81 (a)...
-
Section 37.161 Maintenance of Accessible Features--General
Section 37.161 Maintenance of Accessible Features--General This section applies to all entities providing transportation services, public and private....
-
11B-221.2.3.1 Horizontal dispersion
Exceptions: Horizontal dispersion shall not be required in assembly areas with 300 or fewer seats if the companion seats required by Section 11B-221.3 and wheelchair spaces are located...