Steel – polished and plated or phosphated and prime coated for painting or Stainless Steel – highly polished or satin finish. For corridor doors to patients’ rooms, operating...
Search Results "Curb Ramp Width"
-
Stanley FBB 264 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge 1260
Five Knuckle - Full Mortise Swing Clear Hinge 1260 - Plain Bearing - Standard Weight Description: - ANSI A8123 - For square edge doors - Non-rising removable pin...
-
Hager Companies Three Knuckle - Half Surface Swing Clear Hinge AB7534
Three Knuckle - Half Surface Swing Clear Hinge AB7534 - Concealed Anti-Friction Bearing - Heavy Weight Description: - ANSI A8421 - Beveled surface leaves -...
-
Stanley FBB 269 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
Steel – polished and plated or phosphated and prime coated for painting or Stainless Steel – highly polished or satin finish. For corridor doors to patients’ rooms, operating...
-
Where do I measure for a handrail extension?
[emphasis added, typical] The phrase "in the same direction of" the stair flights or ramp runs simply means in the direction of the normal pedestrian flow up/down the stairs or ramp. ...
-
Relationship to Accessible Routes: ADA Standard Section 502.7
Section 502.7 covers the current ADA Standards for the relationship between accessible parking spaces and accessible routes.
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
§27.75(a) New facilities.
(a) New facilities—
-
Problem
Problem: A passenger drop-off and loading zone is provided but there is no curb ramp between the vehicle area and the sidewalk leading to the accessible polling place entrance....
-
f-iv
Does the ramp have a level landing at the top and bottom of each ramp section that is at least 60 inches long?...
-
T402.8 Running Slope
The maximum running slope of ramps and bridgeplates shall comply with T402.8.1 or T402.8.2....
-
Using the ORAR Exceptions [F202.3, Exception 4 and 1016, Exceptions 1, 2, and 3]
For instance, where traffic calming devices, gates, or other barriers are provided on a paved roadway, the ORAR must have a clear width of 36 inches and obstacles cannot exceed one-half...
-
Additional Number and Types: ADA Standard Section 240.2.1.2
Section 240.2.1.2 covers scoping requirements in the current ADA Standards for additional number and types of ground level play components.
-
11B-240.2.1.2 Additional number and types
Exception: If at least 50 percent of the elevated play components are connected by a ramp and at least 3 of the elevated play components connected by the ramp are different types of play...
-
11B-240.2.1.2 Additional number and types
Exception: If at least 50 percent of the elevated play components are connected by a ramp and at least 3 of the elevated play components connected by the ramp are different types of play...
-
d-iv
Are the handrails mounted 34 to 38 inches above the ramp surface? [ADA Standards § 4.8.5] Yes No...
-
f-vii
Are the handrails mounted 34 to 38 inches above the ramp surface? [ADA Standards § 4.8.5] Yes No...
-
4c.
Are the handrails mounted between 34 and 38 inches above the ramp surface? [ADA Stds 4.8.5] Yes _____ No _____...
-
1.2.3 Landings
Both measurements of ramp landings as described in Section 1.1.15 should not exceed a plus tolerance of 0.5%....
-
405.7.5 Doorways
Where doorways are located adjacent to a ramp landing, maneuvering clearances required by 404.2.4 and 404.3.2 shall be permitted to overlap the required landing area....
-
405.7.5 Doorways
Where doorways are located adjacent to a ramp landing, maneuvering clearances required by 404.2.4 and 404.3.2 shall be permitted to overlap the required landing area....
-
Accessible Routes Throughout the Museum
and a stanchion, passage must be maintained at a minimum of 36 inches wide, measured from inside edge to inside edge of the stanchion bases or floor moldings, except at doors where the width...
-
405.7.5 Doorways
Where doorways are located adjacent to a ramp landing, maneuvering clearances required by 404.2.4 and 404.3.2 shall be permitted to overlap the required landing area....
