Steel – polished and plated or phosphated and prime coated for painting or Stainless Steel – highly polished or satin finish. For corridor doors to patients’ rooms, operating...
Search Results "Curb Ramp Width"
-
Stanley FBB 268 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
-
Cal-Royal Products Swing Clear Hinges
Use in hospitals or other institutional type buildings. Swings door completely clear of opening when door is opened 95 degrees. Swing clear hinges are designed so that when the door...
-
Hager Companies Three Knuckle - Full Mortise Swing Clear Hinge AB7502
Three Knuckle - Full Mortise Swing Clear Hinge AB7502 - Concealed Anti-Friction Bearing - Heavy Weight Description: - For beveled edge doors - ANSI A8121 -...
-
Stanley FBB 264 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
Steel – polished and plated or phosphated and prime coated for painting or Stainless Steel – highly polished or satin finish. For corridor doors to patients’ rooms, operating...
-
Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge 1260
Five Knuckle - Full Mortise Swing Clear Hinge 1260 - Plain Bearing - Standard Weight Description: - ANSI A8123 - For square edge doors - Non-rising removable pin...
-
Hager Companies Three Knuckle - Half Surface Swing Clear Hinge AB7534
Three Knuckle - Half Surface Swing Clear Hinge AB7534 - Concealed Anti-Friction Bearing - Heavy Weight Description: - ANSI A8421 - Beveled surface leaves -...
-
Stanley FBB 269 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
Steel – polished and plated or phosphated and prime coated for painting or Stainless Steel – highly polished or satin finish. For corridor doors to patients’ rooms, operating...
-
§27.75(a) New facilities.
(a) New facilities—
-
§ 38.83(c)(7) Stowage
A compartment, securement system, or other appropriate method shall be provided to ensure that stowed ramps or bridge plates, including portable ramps or bridges plates stowed in the passenger...
-
Relationship to Accessible Routes: ADA Standard Section 502.7
Section 502.7 covers the current ADA Standards for the relationship between accessible parking spaces and accessible routes.
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
Problem
Problem: A passenger drop-off and loading zone is provided but there is no curb ramp between the vehicle area and the sidewalk leading to the accessible polling place entrance....
-
f-iv
Does the ramp have a level landing at the top and bottom of each ramp section that is at least 60 inches long?...
-
Using the ORAR Exceptions [F202.3, Exception 4 and 1016, Exceptions 1, 2, and 3]
For instance, where traffic calming devices, gates, or other barriers are provided on a paved roadway, the ORAR must have a clear width of 36 inches and obstacles cannot exceed one-half...
-
T402.8 Running Slope
The maximum running slope of ramps and bridgeplates shall comply with T402.8.1 or T402.8.2....
-
Additional Number and Types: ADA Standard Section 240.2.1.2
Section 240.2.1.2 covers scoping requirements in the current ADA Standards for additional number and types of ground level play components.
-
11B-240.2.1.2 Additional number and types
Exception: If at least 50 percent of the elevated play components are connected by a ramp and at least 3 of the elevated play components connected by the ramp are different types of play...
-
11B-240.2.1.2 Additional number and types
Exception: If at least 50 percent of the elevated play components are connected by a ramp and at least 3 of the elevated play components connected by the ramp are different types of play...
-
1134A.6, Item 5
5. Thresholds. When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units...
-
1134A.6, Item 5
5. Thresholds. When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal...
-
d-iv
Are the handrails mounted 34 to 38 inches above the ramp surface? [ADA Standards § 4.8.5] Yes No...
-
f-vii
Are the handrails mounted 34 to 38 inches above the ramp surface? [ADA Standards § 4.8.5] Yes No...
-
4c.
Are the handrails mounted between 34 and 38 inches above the ramp surface? [ADA Stds 4.8.5] Yes _____ No _____...
