the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter with a built-in...
Search Results "Built-In Table"
Commonly Searched Documents
-
11B-306.3.3 Minimum required depth
-
Accessible Swimming Pools and Spas
ADAAG addresses only the built environment (structures and grounds); the guidelines do not address operational issues....
-
Accessible Golf Courses
ADAAG addresses only the built environment (structures and grounds). The guidelines do not address operational issues....
-
New Construction
Public toilets at a park were built to comply with the new construction requirements of the ADA Standards....
-
602.2 Accessibility and Compatibility Features
Documentation shall include accessibility features that are built-in and accessibility features that provide compatibility with assistive technology....
-
III-3.12000 Places of public accommodation located in private residences
ILLUSTRATION: J, a family day care provider, is having a new home built. J intends to use two of the rooms as a family day care center....
-
1.1.1
ADAAG and accessibility experts recommend that ramps be built with the least slope possible but in no case should a ramp exceed a 1:12 slope (except for curb ramp flares, and other approved...
-
11B-306.3.3 Minimum required depth
the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter with a built-in...
-
11B-306.3.3 Minimum required depth
the finish floor or ground at a depth of 8 inches (203 mm) minimum increasing to 29 inches (737 mm) high minimum above the finish floor or ground at the front edge of a counter with a built-in...
-
Turning Radius
Table 19 of this report shows the friction factors based on 85th percentile speeds. Additionally, the friction factors suggested by AASHTO are provided for comparison....
-
Best Practice Recommendations for Layout Planning
Keep these recommendations in mind as you plan the layout of seating, tables, and other elements: Accessible restrooms should be on the same floor as meeting rooms....
- Image Identification Project
-
Speed
Table 12. Speed....
- Accessibility Online
- Ultratec Miniprint 425 TTY
-
3.2 Comparison of Sub-samples across Data Collection Sites
Table 3‒2: Gender, age and number of years with disability across sites. ...
-
3. Lift Compatibility Exception
, agreed that equipment designed for use with an overhead lift should be excepted, and also stated that portable floor lifts should be designed to be compatible with exam and procedure tables...
-
11B-240.2.1.2 Additional number and types
Where elevated play components are provided, ground level play components shall be provided in accordance with Table 11B-240.2.1.2 and shall comply with Section 11B-1008.4....
-
F240.2.1.2 Additional Number and Types
Where elevated play components are provided, ground level play components shall be provided in accordance with Table F240.2.1.2 and shall comply with 1008.4....
-
Wheelbase Definition
Table 1 shows the minimum, maximum and percentile values of the wheelbase dimension for manual wheelchairs, front- and rear-wheel drive power chairs, 3- and 4-wheel electric scooters....
-
240.2.1.2 Additional Number and Types
Where elevated play components are provided, ground level play components shall be provided in accordance with Table 240.2.1.2 and shall comply with 1008.4....
-
R410.6 Character Height
Minimum character height shall comply with Table R410.2.5....
-
240.2.1.2 Additional Number and Types
Where elevated play components are provided, ground level play components shall be provided in accordance with Table 240.2.1.2 and shall comply with 1008.4....