These modes would need to be supplied directly in the same ICT or through compatible assistive technology....
Search Results "Area of Rescue Assistance"
Filters
Commonly Searched Documents
-
6. Modifications to the Functional Performance Criterion for Limited Vision
-
405.1 General
EXCEPTION: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with 405....
-
405.1 General
EXCEPTION: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with 405....
-
inLOOP Personal Loop Digital 600
Digital inLOOP 600 is designed to provide a stable loop signal in areas up to 600 square feet, but will power areas up to 800 square feet in ideal conditions. ...
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
405.1 General
EXCEPTION: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with 405....
-
F245.4.2 Routes to and within Common Use and Public Use Areas
This section requires at least one outdoor recreation access route to connect each picnic unit with mobility features with common use and public use areas serving the unit; and at least...
-
Notification: ADA Standard Section 809.5.5.1
Where visible doorbell signals are located in sleeping areas, they shall have controls to deactivate the signal....
-
11B-809.5.5.1 Notification
Where visible doorbell signals are located in sleeping areas, they shall have controls to deactivate the signal....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
11B-405.1 General
Exception: In assembly areas, aisle ramps adjacent to seating and not serving elements required to be on an accessible route shall not be required to comply with Section 11B-405....
-
A. Passenger Drop-Off Areas
Passenger Drop-Off Areas During an evacuation the most efficient method of transporting people to shelters likely will include using vans and buses....
-
1. What are the basic requirements of ADA Title II and Section 504?
Section 504 similarly prohibits discrimination on the basis of disability against qualified individuals with a disability in programs, services, and activities receiving Federal financial assistance...
-
Ampetronic MLD5 MultiLoop Driver Hearing System
With an Ampetronic MultiLoop™ Low Loss design, the MLD5 will drive an area up to 360m2, or can be used to drive two perimeter looped areas of up to 420m2 each....
-
Ampetronic MLD7 MultiLoop Driver Hearing System
With an Ampetronic MultiLoop™ Low Loss design, the MLD7 will drive an area up to 840m2, or can be used to drive two perimeter looped areas of up to 700m2 each....
-
Types of Systems
Types of Systems Assistive listening systems are generally categorized by their mode of transmission....
-
11B-221.2.1 Number and location
Wheelchair spaces shall be provided complying with Section 11B-221.2.1.
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951.
-
11B-1008.2.5.3.2 Handrail height
The top of handrail gripping surfaces shall be 20 inches (508 mm) minimum and 28 inches (711 mm) maximum above the ramp surface.
-
F221.2.1 Number and Location
Wheelchair spaces shall be provided complying with F221.2.1.
