Search Results "Toilet Room Door"

• Products and Additional Resources > Products
  Mega Jailhouse Anti-Ligature Toilet Paper Holder With Concealed Mount Behind Wall Access Required
  

  Description: This anti-ligature toilet paper holder is fabricated with one-piece construction and consists of a stainless steel rod with a pivoting ball joint that releases under excessive...

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  F206.4.1 Public Entrances

  All public entrances provided in accordance with Paragraph F206.4.1 (Public Entrances) of the ABAAS must have at least one entrance door complying with Section 404.3 (Automatic and Power-Assisted...

• State and Local Documents > Codes and Standards > 2019 California Standards
  11B-233.3.1.2.6 Public housing facility site impracticality

  ETA Editor's Note This section of the 2019 California Building Code was amended by the Division of the State Architect. The requirements in this section were previously found in...

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  4.17 Toilet Stalls

  [See subsections ...]

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  A4.17 Toilet Stalls

  [See subsections ...]

• Federal Documents > Standards > Uniform Federal Accessibility Standards (UFAS)
  4.17 TOILET STALLS

  [See subsections ...]

• Federal Documents > Standards > Uniform Federal Accessibility Standards (UFAS)
  A4.17 TOILET STALLS

  [See subsections ...]

• Federal Documents > Regulations > 28 CFR Part 36 Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities (1991 ADA Title III Regulations)
  Sec.36.403(f) Disproportionality

  (f) Disproportionality.

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  F216 Signs

  [See subsections ...]

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  703.4.1 Height above Finish Floor or Ground

  Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-703 SIGNS

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-703.4.1 Height above finish floor or ground

  Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60...

• Federal Documents > Standards > ABA Accessibility Standard for GSA Facilities Pocket Guide
  703 Signs

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  703 Signs

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  216 Signs

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2012 Texas Accessibility Standards
  703.4.1 Height Above Finish Floor or Ground

  Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...

• Federal Documents > Technical Assistance > ADA Checklist for New Lodging Facilities
  VI. Interior Signs...

  [See subsections ...]

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  216 Signs

  216 Signs

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  703 Signs

  703 Signs

• State and Local Documents > Codes and Standards > 2012 Florida Accessibility Code
  703.4.1 Height above Finish Floor or Ground

  703.4.1 Height above Finish Floor or Ground. Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the...

• Federal Documents > Regulations > 28 CFR Part 36 Nondiscrimination on the Basis of Disability by Public Accommodations and in Commercial Facilities (2010 ADA Title III Regulations with amendments issued through Dec. 2016)
  § 36.403(f) Disproportionality.

  (f) Disproportionality.

• State and Local Documents > Codes and Standards > 2013 California Standards for Accessible Design Pocket Guide
  11B-216 SIGNS

  [See subsections ...]

• Federal Documents > Technical Assistance > ADAAG Manual
  Scoping [4.1.2(7), 4.1.3(16)]

  Scoping [4.1.2(7), 4.1.3(16)] Specifications for signage apply according to the type of sign provided. ADAAG does not require building signage except to identify certain...

• Federal Documents > Standards > 1991 ADA Standards for Accessible Design
  A4.30 Signage

  [See subsections ...]