The 17 inch minimum depth and 21 inch minimum width should be located on both sides of examination chairs with a fixed footrest to allow for a left or right transfer....
Search Results "Seat Width"
-
5.3.3.1 Transfer Sides for Exam Chairs with Fixed Footrests
-
607.2 Clearance
Where a permanent seat is provided at the head end of the bathtub, the clearance shall extend 12 inches (305 mm) minimum beyond the wall at the head end of the bathtub....
- Bobrick Accessibility Video -- Design for Turning Radiuses
-
Exceptions Considered for Wheelchair Spaces on Raised Platforms
For example, the wheelchair footrests would be allowed to extend beyond the depth of the raised platform and over any edge protection on wheelchair weight scales used by patients seated...
-
Sec.36.308(b) New construction and alterations
The provision and location of wheelchair seating spaces in newly constructed or altered assembly areas shall be governed by the standards for new construction and alterations in subpart...
-
§ 35.151(e)(2)
(2) Facilities with more than 50 beds covered by this section that provide common use bathing facilities shall provide at least one roll-in shower with a seat that complies with the relevant...
-
Kohler Veil™ One-Piece Elongated Dual-Flush Wall-Hung Toilet With Reveal® Quiet-Close™ Seat
Requires the Premium User plan or above. (Login or upgrade your account!)
- Caroma® USA Invisi Series II Walvit Wall Hung Elongated Water Closet
- Bobrick B-3091 ClassicSeries® Recessed-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
- Bobrick B-3092 ClassicSeries® Recessed-Mounted Toilet Tissue, Seat-Cover Dispenser and Waste Disposal
-
4.1.2(5)(b)
(b) One in every eight accessible spaces, but not less than one, shall be served by an access aisle 96 in (2440 mm) wide minimum and shall be designated “van accessible” as required...
-
Section 35.151(g) Assembly Areas (Section-by-Section Analysis)
The sale of any seats in the covered area requires removal of the platform, thereby eliminating some of the required wheelchair seating locations. ...
- Whitehall Mfg. WH2105BAR Bariatric Toilet Siphon Jet Type Off-Floor
-
Minimum Requirement
.); where fixed seating is provided and where there may be an audio-amplification system....
- Willoughby Industries ETW-1445-BS-HC Toilet for 45-degree Chase Wall
-
Section 35.151(g) Assembly areas (Section-by-Section Analysis)
These platforms cover groups of conventional seats and are used to provide groups of wheelchair seats and companion seats....
-
11B-221.2.4 Temporary structures
Exception: When an entire seating section is placed on temporary platforms or other movable structures in an area where fixed seating is not provided, in order to increase seating for an...
-
11B-221.2.4 Temporary structures
Exception: When an entire seating section is placed on temporary platforms or other movable structures in an area where fixed seating is not provided, in order to increase seating for an...
-
11B-221.2.4 Temporary structures
Exception: When an entire seating section is placed on temporary platforms or other movable structures in an area where fixed seating is not provided, in order to increase seating for an...
-
M302.2.3 Transfer Sides
The transfer surface shall be located to provide options to transfer from a mobility device onto one short side (depth) and one long side (width) of the surface....
-
1003.2.13.2 Enclosed exit stairways
An enclosed exit stairway, to be considered part of an accessible means of egress, shall have a clear width of 48 inches (1219 mm) minimum between handrails and shall either incorporate...
-
15(d)
HWI shall ensure that each Post-1993 Owned Hotel and Post-1993 Joint Venture Hotel has one removable tub seat for each and every accessible tub room in the hotel that does not already have...
-
608.5.2 Standard Roll-In Type Shower Compartments
Where a seat is provided, the controls, faucets, and shower spray unit shall be installed on the back wall adjacent to the seat wall and shall be located 27 inches (685 mm) maximum from...
-
11B-206.5.3 Transient lodging facilities
into and within guest rooms that are not required to provide mobility features complying with Section 11B-806.2 shall comply with Section 11B-404.2.3 _|Doors, Doorways, and Gates; Clear Width...