Curb ramps are not permitted within the access aisle....
Search Results "Permit"
Commonly Searched Documents
-
R310.3 Access Aisle
-
T602.4 Size
EXCEPTION: The portion of the wheelchair space occupied by wheelchair footrests shall be permitted to be located beneath another seat provided that space beneath the seat is 30 inches (760...
-
§104.23(c)(1)
Departures from particular technical and scoping requirements of UFAS by the use of other methods are permitted where substantially equivalent or greater access to and usability of the building...
-
E. Accommodations for Air Travelers who are Deaf, Hard of Hearing, or Deaf-Blind
If your carrier makes available a telephone reservation and information service to the public, you must make available a text telephone (TTY) to permit individuals who are deaf or hard of...
-
§ 36.311(b)(1) Use of other power-driven mobility devices
A public accommodation shall make reasonable modifications in its policies, practices, or procedures to permit the use of other power-driven mobility devices by individuals with mobility...
-
10.3.1(13)
boarding platforms, the route surface shall be level and flush with the rail top at the outer edge and between rails, except for a maximum 2‒1/2 inch gap on the inner edge of each rail to permit...
-
Wheelchair
A person whose disability requires use of a wheelchair or mobility device may use a wheelchair or mobility device that meets this definition anywhere foot travel is permitted (36 CFR 212...
-
§ 35.137(b)(1) Use of other power-driven mobility devices
A public entity shall make reasonable modifications in its policies, practices, or procedures to permit the use of other power-driven mobility devices by individuals with mobility disabilities...
-
11B-703.2.5 Character height
Exception: Reserved [2010 ADAS] EXCEPTION: Where separate raised and visual characters with the same information are provided, raised character height shall be permitted to be ½ inch...
-
Accessible Route to Miniature Golf Course Holes
Accessible holes are required to be consecutive with an exception permitting one break in the sequence of consecutive holes provided that the last hole on the miniature golf course is the...
-
1003.3.1 Boat Slip Clearance
Clear pier space shall be permitted to be 36 inches (915 mm) wide minimum for a length of 24 inches (610 mm) maximum, provided that multiple 36 inch (915 mm) wide segments are separated...
-
Hospital and healthcare settings. (Section-by-Section Analysis)
Public entities, including public hospitals, must modify policies, practices, or procedures to permit the use of a service animal by an individual with a disability. 28 CFR 35.130(b)(7)...
-
11B-408.4.1 Car dimensions and doors
Cars that provide a clear width 51 inches (1295 mm) minimum shall be permitted to provide a clear depth 51 inches (1295 mm) minimum provided that car doors provide a clear opening 36 inches...
-
M303.2.4.1.2 Height
Between 9 inches (230 mm) and 27 inches (685 mm) above the floor, the knee clearance shall be permitted to reduce at a rate of 1 inch (25 mm) in depth for every 6 inches (150 mm) in height...
-
Standby Power for Platform Lifts
The 2010 Standards at section 207.2 require standby power to be provided for platform lifts that are permitted to serve as part of an accessible means of egress by the IBC....
-
404.2.7 Door and Gate Hardware
Existing locks shall be permitted in any location at existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed...
-
404.2.7 Door and Gate Hardware
Existing locks shall be permitted in any location at existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed...
-
404.2.7 Door and Gate Hardware
Existing locks shall be permitted in any location at existing glazed doors without stiles, existing overhead rolling doors or grilles, and similar existing doors or grilles that are designed...
-
407.3.1 Identification (Section-by-Section Analysis)
Contoured keys would be permitted under proposed 407.3.1, for example, by providing keys with raised edges and concave centers, as is often used on computer keyboards and landline telephone...
-
1017.1 General
When an entity determines that a condition in 1019 does not permit full compliance with a specific provision in 1017 on a portion of a trail, Exception 1 permits the portion of trail to...
-
1010.1.7 Thresholds
In occupancy Group R-2 or R-3, threshold heights for sliding and side-hinged exterior doors shall be permitted to be up to 7¾ inches (197 mm) in height if all of the following apply:...
-
F201.3 Temporary and Permanent Structures
Structures and equipment directly associated with the actual processes of construction are not required to be accessible as permitted in F203.2....
-
409.3.1 Power Operation
EXCEPTION: In elevator cars with more than one opening, hoistway doors and gates shall be permitted to be of the manual-open, self-close type....
-
608.4 Seats
EXCEPTION: In residential dwelling units, seats shall not be required in transfer type shower compartments provided that reinforcement has been installed in walls so as to permit the installation...