The Advisory Committee observed that, due to technological changes since the promulgation of the existing standards and guidelines, some formerly “closed” product types were now open, while...
Search Results "Opening"
-
7. Definition and Coverage of Technology with “Closed Functionality”
-
Best Practice Recommendations for Layout Planning
Doors should be propped open at the start and end of each session, and event staff should be on hand to open doors during sessions if needed....
-
11B-1003.3.2 Boarding pier clearances
Every 10 feet (3048 mm) maximum of linear pier edge shall contain at least one continuous clear opening 60 inches (1524 mm) wide minimum....
- Gamco Recessed Sanitary Napkin Disposal - ND-4
- Gamco Surface Mounted Coverall Sanitary Napkin Disposal - ND-5
- Nana Wall Systems, Inc. Sliding Glass Walls With Solid Wood HSW66
- Access to Independence of Cortland County, Inc. (ATI) - Cortland, NY
-
Expert Report of Ken Schoonover, P.E., KMS Associates, Inc. (August 7, 2018)
., Houston, TX Sidewalks & Walkways: The designated accessible route to the entrance has surface openings greater than 1/2 inch (1991 ADA Stds 4.3.6, 4.5.4; 2010 ADA Stds 403.2...
- Magnuson Group RETTO Outdoor Waste Receptacle
- Hager Companies Five Knuckle - Full Mortise Swing Clear Hinge 1260
- Magnuson Group SLOPE Waste Receptacles
-
11B-233.3.1.2.6.5 Additional requirements.
Interior door opening width complying with Section 11B-404.2.3. 3. Door and gate hardware complying with Section 11B-404.2.7. 4....
-
8. Testing to Ensure Direct, Equal Access
Include these steps in your testing: Conduct two types of test calls: silent, open line calls in which no tones are emitted, and calls in which the caller introduces the call by...
-
2. Different Types of Auxiliary Aids and Services
assistive listening systems hearing aid-compatible telephones computer terminals speech synthesizers communication boards text telephones (TTYs) open...
-
Maneuvering Clearance or Standby Power for Automatic Doors
If an emergency-related power failure prevents the operation of the automatic door, a person with a disability could be trapped unless there is either adequate maneuvering room to open the...
-
4. COMMON PATH OF TRAVEL ITEMS
exceed 1:12 (8.33%) • Cross slope of walks and ramps not to exceed 1:48 (2.083%) • Landings and level area slopes not to exceed 1:48 (2.083%) • Vertical changes in level • Openings...
-
22. Q: How do I make my child care center's building, playground, and parking lot accessible to people with disabilities?
Installing offset hinges to widen a door opening, installing grab bars in toilet stalls, or rearranging tables, chairs, and other furniture are all examples of barrier removal that might...
-
Self-Evaluation Forms
To open these files download Adobe Acrobat Reader DC. This is a free and trusted standard for viewing and editing PDFs....
-
C. Doors
at least one door to each accessible space have at least 18" of clear floor space on the latch side for persons who use wheelchairs, walkers and other mobility aids to approach and pull open...
-
What if the Guidelines Appear To Conflict With Each Other?
Roads that have restrictions or closures to use by motorized vehicles may be open to foot travel, so how can a road be gated or bermed to keep out vehicles but still allow access by a person...
-
Treads and Risers [4.9.2], Nosings [4.9.3]
Open risers and abrupt or extended nosings (i.e., projecting more than 1 1/2 inches) can catch the toe....
-
1016.1 General
outdoor recreation access routes, passing spaces, and resting intervals (1016.2); the clear width of outdoor recreation access routes (1016.3); passing spaces (1016.4); obstacles (1016.5); openings...
-
4.1.4(2) MILITARY EXCLUSIONS
This exclusion does not apply to those portions of a building or facility which may be open to the public or which may be used by the public during the conduct of normal business or which...
-
III−1.3000 Commercial facilities
A commercial facility, such as a manufacturing facility, is not a place of public accommodation solely by virtue of its being open to vendors, salespersons, or job applicants....