Exception: For elevators that have a rated speed of 200 feet per minute (1 m/s) or less, a non-verbal audible signal with a frequency of 1500 Hz maximum which sounds as the car passes or...
Search Results "Maximum Extent Practicable"
Filters
Commonly Searched Documents
-
11B-407.4.8.2.1 Signal type
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
Direct Threat to the Health or Safety of Others
A significant risk to the health or safety of others that cannot be eliminated by a modification of policies, practices, or procedures, or by the provision of auxiliary aids or services....
-
List of Subjects for 28 CFR Part 36
Administrative practice and procedure, Buildings and facilities, Business and industry, Civil rights, Individuals with disabilities, Penalties, Reporting and recordkeeping requirements....
-
§8.51(a)(1)
(1) Evaluate its current policies and practices to determine whether, in whole or in part, they do not or may not meet the requirements of this part;...
-
§100.400(c)(6)
(6) Retaliating against any person because that person reported a discriminatory housing practice to a housing provider or other authority....
-
Safe Harbors
Standards Before March 15, 2012 Elements that do not comply with the requirements for those elements in the 1991 Standards must be modified to the extent...
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
-
Effective Emergency Management: Making Improvements for Communities and People with Disabilities
To support this trend, this report assesses scientific studies of preparedness, response, recovery, and mitigation efforts, and recommends practical, policy, and research initiatives that...
-
504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (13 mm) maximum....
-
504.5 Nosings
The radius of curvature at the leading edge of the tread shall be 1/2 inch (13 mm) maximum....
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
11B-607.4.1.1 Back wall
Two grab bars shall be installed on the back wall, one located in accordance with Section 11B-609.4 and the other located 8 inches (203 mm) minimum and 10 inches (254 mm) maximum above the...
-
§35.130(b)(3) (Section-by-Section Analysis)
The phrase "criteria or methods of administration" refers to official written policies of the public entity and to the actual practices of the public entity....
-
§382.119(a)
themselves as needing visual or hearing assistance have prompt access to the same information provided to other passengers on the aircraft as described in paragraph (b) of this section, to the extent...
-
§ 382.5 Facility
structures, equipment, roads, walks, parking lots, and any other real or personal property, normally used by passengers or prospective passengers visiting or using the airport, to the extent...
-
Tent Pads and Tent Platforms
Where there is a condition for an exception, the clear floor or ground space only has to meet the size requirement to the extent practicable....
-
Picnic Units
Connect as many units with an outdoor recreation access route to the major features of the site as practicable, given the specific natural site constraints, the level of site development...
-
7.2 Overview of Legal Obligations
7.2 Overview of Legal Obligations An employer may not discriminate against a qualified individual with a disability because of the disability, in any employment practice, or any...
-
2. Referenced Documents
2.1 ASTM standards E867 Standard Terminology Relating to Vehicle-Pavement Systems E1364 Standard Test Method for Measuring Road Roughness by Static Level Method E1926 Standard Practice...
-
11B-809.8.1 Door Thresholds
Secondary exterior door thresholds, including sliding door tracks, shall be 3/4 inch (19.1 mm) high maximum with a 1:2 maximum slope....
-
11B-610.3 Shower compartment seats
The top of the seat shall be 17 inches (432 mm) minimum and 19 inches (483 mm) maximum above the bathroom finish floor....
-
Utilities at Recreation Sites
compliance with a specific requirement for clear floor or ground space (surface, slope, size, or location), the clear floor or ground space only has to comply with requirements to the extent...
-
CASI California Survey Reports Acceptance Criteria - Construction and Manufacturing Tolerances AC 02-12
Dimensions that are not stated as "maximum" or "minimum" are absolute. 11B-104.1.1 Construction and Manufacturing Tolerances....