A tactilely discernible numerical keypad similar to a telephone keypad containing a raised dot with a dot base diameter between 1.5 mm and 1.6 mm and a height between 0.6 mm and 0.9 mm on...
Search Results "Character Stroke (Raised)"
-
11B-707.9.1.1 Tactilely discernible numerical keypad
-
11B-407.2.1.2 Size and shape
Call buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in the smallest dimension and shall be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding...
-
Meeting User Needs
Moreover, the same grab bar placement could be used to accommodate people with both right and left hemiplegia (often associated with stroke in older individuals)....
-
Users and Needs
For example, independent and congregate living facilities designed by OWP&P, were expected to accommodate people with mobility disabilities due to physical frailty, stroke, and arthritis...
-
Implementation and Enforcement
If the United States believes that this Agreement or any portion of it has been violated, it will raise its concerns with LCG and the parties will attempt to resolve the concerns in good...
- Ultratec Superprint TTY
- Ultratec Superprint 4425 TTY
- ADA Sign Depot Wheelchair Accessible Restroom Sign with Directional Arrow - Tactile Text, Symbols, and Grade 2 Braille
- The Spa Lift Ultra™ Pool & Spa Access Lift
-
11B-411.2.1.2.5 Audio output
shall provide verbal announcements of operating instructions, location and use of the star (*) and minus sign (-) buttons, user input confirmation, announcement of the elevator assignment characters...
-
F216.13 Trailhead Signs
Tactile characters are not required on exterior signs. Trail information signs are not required to display the International Symbol of Accessibility....
-
1009.11 Instructions
Signage shall comply with Chapter 11A, Section 1143A or Chapter 11B, Section 11B-703.5 requirements for visual characters. The instructions shall include all of the following: 1....
- SafePath: Sport Floor Reducers for ADA and Disability Access
-
Accessible Routes
An accessible route is not required to serve raised diving boards, platforms, or water slides....
-
12162(e)(2)(A)(ii)(II) Commuter rail
in no event later than 3 years after July 26, 1990, except that the time limit may be extended by the Secretary of Transportation up to 20 years after July 26, 1990, in a case where the raising...
-
4.10.3 Hall Call Buttons
Buttons shall be raised or flush. Objects mounted beneath hall call buttons shall not project into the elevator lobby more than 4 in (100 mm)....
-
4.10.3 HALL CALL BUTTONS
Buttons shall be raised or flush. Objects mounted beneath hall call buttons shall not project into the elevator lobby more than 4 in (100 mm)....
-
§ 38.83(b)(7) Platform gaps
Any openings between the lift platform surface and the raised barriers shall not exceed 5/8 inch wide....
-
§ 38.23(b)(7) Platform gaps
Any openings between the platform surface and the raised barriers shall not exceed 5/8 inch in width....
-
T304 Operable Parts
In the 2010 NPRM, the Access Board proposed to raise the minimum height of operable parts in non-rail vehicles from 15 inches to 24 inches. See 2010 NPRM, Section T805.2....
- Increasing Opportunities for Access on the Appalachian Trail: A Design Guide
-
1010.1.6 Thresholds
Raised thresholds and floor level changes greater than ¼ inch (6.4 mm) at doorways shall be beveled with a slope not greater than one unit vertical in two units horizontal (50-percent slope...
-
1010.1.6 Thresholds
Raised thresholds and floor level changes greater than ¼ inch (6.4 mm) at doorways shall be beveled with a slope not greater than one unit vertical in two units horizontal (50-percent slope...