When in use for boarding or alighting, the ramp or bridge plate shall be attached to the vehicle, or otherwise prevented from moving such that it is not subject to displacement when loading...
Search Results "Vehicle Hand Control"
-
§ 38.125(c)(6)(i) Requirement
-
§ 38.159(b)(5) Platform barriers
A movable barrier or inherent design feature shall prevent a wheelchair or mobility aid from rolling off the edge closest to the vehicle until the platform is in its fully raised position...
-
Costs and Benefits
and 13563, the Access Board prepared a final regulatory assessment (Final RA) to assess the likely costs and benefits of new or revised accessibility requirements in the 2016 Non-Rail Vehicle...
- AER-DEC™ Product Video
-
11B-806.3.2 Notification devices
Telephones shall have volume controls compatible with the telephone system and shall comply with Section 11B-704.3....
-
11B-806.3.2 Notification devices
Telephones shall have volume controls compatible with the telephone system and shall comply with Section 11B-704.3....
- Deltrex Hand/Foot Push Plate Switches
-
Push Plates, Buttons, and Bars
Push-activated controls not requiring more than 5 lbf are acceptable. Buttons that are raised or flush are easier to use than those that are recessed....
-
Gurney Accessible Bathroom
Movable wall for shower gurney access Vanity remodeled to clear the space for wheelchair users Hand-held shower 6’ hose on shower Shower heads at four...
- Bradley Advocate AV-Series AV30 Lavatory, Soap & Hand Dryer
-
Station platforms
Station platforms must be coordinated with the vehicle floor height. (DOT ADA Standard 810.5.3.)...
-
Height [4.27.3]
Height [4.27.3] The operable portions of controls and operating mechanisms must be within established reach ranges for either a forward or side reach as required in 4.2.5 and 4.2.6 (see...
-
H. Chapter 7: Communication Features
Chapter 7 in the 2016 Non-Rail Vehicle Guidelines establishes technical requirements for characters on signs, the International Symbol of Accessibility, and vehicular announcement systems...
- Allegion aptiQ Mullion and Mini-Mullion Reader Installation
-
R310.3.2 Length
Access aisles shall extend the full length of the vehicle pull-up spaces they serve....
- BTX Intelligent Fashion Tumo Programming Reverse Motor Direction
- Bobrick TrimLineSeries Recessed Paper Towel Dispenser/Automatic Hand Dryer/Waste Bin (3-in-1 Unit) B-38030 230V
-
Is compliance required for parking spaces designed specifically for recreational vehicles such as motor homes and camping or boating trailers?
Spaces designed for recreational vehicles (RVs) and trailers are not exempt from coverage, but the Standards do not include technical provisions specific to these spaces....
- Access Board: Transfer Type Shower Compartments
-
1012.1 General
This section contains the technical requirements for parking spaces provided within camping units and picnic units with mobility features and pull-up spaces for recreational vehicles at...
-
407.4.8.1.2 Location
Indicators shall be located above the car control panel or above the door....
-
11B-407.4.8.1.2 Location
Indicators shall be located above the car control panel or above the door....
-
11B-407.4.8.1.2 Location
Indicators shall be located above the car control panel or above the door....
-
11B-407.4.8.1.2 Location
Indicators shall be located above the car control panel or above the door....
