The frequency of tread obstacles and tread obstacles that cross the full width of the trail tread can make travel difficult for individuals who use wheeled mobility devices....
Search Results "Rail Crossing"
-
1017.5 Tread Obstacles
-
Issue 14: Inspection of contractor’s work - Beware of field changes!
Note shifting slopes and cross slopes on the ramps in addition to poor APS location. ...
-
What other surface considerations affect wheelchair travel?
In addition to slip resistance requirements, wheelchair users are affected by the rolling resistance of the surface of the floor and--on exterior surfaces--by cross slope....
-
11B-221.2.1.5 Stadium-style movie theaters
The required wheelchair spaces shall be located on risers or cross-aisles in the stadium section that satisfy at least one of the following criteria: Located within the rear 60 percent...
-
General: ADA Standard Section 236.1
Section 236.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for exercise machines and equipment.
-
11B-221.2.1.5 Stadium-style movie theaters
The required wheelchair spaces shall be located on risers or cross-aisles in the stadium section that satisfy at least one of the following criteria: Located within the rear 60 percent...
-
Curb Ramps [4.7]
Curb ramps complying with 4.7 are required wherever an accessible route crosses a curb....
-
T207.2 Passenger Doorways
Handrails or stanchions shall be provided at passenger doorways in a configuration that permits grasping and use from outside the non-rail vehicle and throughout the boarding and alighting...
-
T304.2 Height
Operable parts shall be located 24 inches (610 mm) minimum and 48 inches (1220 mm) maximum above the floor of non-rail vehicles....
-
T301.1 Scope
The requirements in Chapter 3 shall apply where required by Chapter 2 or where otherwise referenced in any other chapter of the Non-Rail Vehicle Guidelines....
-
T701.1 Scope
The requirements in Chapter 7 shall apply where required by Chapter 2 or where otherwise referenced in any other chapter of the Non-Rail Vehicle Guidelines....
-
T401.1 Scope
The requirements in Chapter 4 shall apply where required by Chapter 2 or where otherwise referenced in any other chapter of the Non-Rail Vehicle Guidelines....
-
T501.1 Scope
The requirements in Chapter 5 shall apply where required by Chapter 2 or where otherwise referenced in any other chapter of the Non-Rail Vehicle Guidelines....
-
T601.1 Scope
The requirements in Chapter 6 shall apply where required by Chapter 2 or where otherwise referenced in any other chapter of the Non-Rail Vehicle Guidelines....
-
12184(c)(2)(C)(ii)
(ii) embodies, or is being restored to embody, the distinctive characteristics of a type of rail passenger car used in the past, or to represent a time period which has passed....
-
§ 37.107(c)(3)(ii)
(ii) Embodies, or is being restored to embody, the distinctive characteristics of a type of rail passenger car used in the past, or to represent a time period which has passed....
-
§ 37.89(a)(2)
(2) Purchases or leases an intercity or commuter rail car which has been remanufactured so as to extend its useful life for ten years or more....
-
RUNNING SLOPE
(As differentiated from the definition of “Cross Slope”.)...
-
7.4.3 Slope
Trail running slopes (grades) and cross slopes shall comply with sections 7.4.3.1 and 7.4.3.2....
-
4.7.1 Location
Curb ramps complying with 4.7 shall be provided wherever an accessible route crosses a curb....
-
4.7.1 LOCATION
Curb ramps complying with 4.7 shall be provided wherever an accessible route crosses a curb....
-
T403.2 Boarding Direction
Lift platforms shall be designed to permit passengers who use wheelchairs the option to board the platforms facing either toward or away from the non-rail vehicle....
-
T215.3. Public Address and Stop Request Systems
Large non-rail vehicles that operate in fixed route service with multiple designated stops shall provide public address and stop request systems in accordance with T215.3....
-
T402.8.2 Deployment to Boarding Platforms
The running slope of ramps and bridgeplates used for deployment to platforms shall be 1:8 maximum, as measured to the boarding platform with the non-rail vehicle resting on a flat surface...