., toilet rooms, drinking fountains, and public telephones) that serve the altered area. For example, an alteration is planned for a portion of an existing composite play structure....
Search Results "Drinking Fountain Spout Height"
-
15. When are "path of travel" obligations triggered?
-
M305.3.2 Height (Section-by-Section Analysis)
For horizontal supports, the MDE NPRM proposed a gripping surface height of 34 inches minimum and 38 inches maximum above the standing surface....
-
Outdoor Constructed Features at Trailheads [F247.3.1 and 1011]
Toilet and bathing facilities, parking facilities, and drinking fountains must comply with the applicable sections of the ABA Standards....
-
Exception 2
because of an alteration to an area served by those elements of the path of travel: A primary entrance to the building or facility, Toilet and bathing facilities serving the area, Drinking...
-
Zurn Z5560 Commercial EcoVantage Elongated Toilet ADA Height
Pressure assist tank High performance EcoFlushTM technology Easy touch pneumatic handle actuation Ultra quiet flush Siphon jet flush action ADA height...
-
6.2 Presentations that Informed the Minimum Height Deliberations
about the minimum transfer surface height recommendation....
-
11B-225.3 Self-service storage facilities
Egress complying with Section 11B-207; Parking Spaces complying with Section 11B-208; and, where provided, other public use or common use elements and facilities such as toilet rooms, drinking...
-
11B-225.3 Self-service storage facilities
Egress complying with Section 11B-207; Parking Spaces complying with Section 11B-208; and, where provided, other public use or common use elements and facilities such as toilet rooms, drinking...
-
E2-a
Items to check include wall-mounted fire extinguishers, light fixtures, coat hooks, shelves, drinking fountains, and display cases....
-
Defining and Delivering Disability-Competent Care - The Lived Experience Of Disability
This is the second webinar in Webinar Series #1, "Leading Healthcare Practices and Training: Defining and Delivering Disability-Competent Care". The objective of this webinar was to...
-
Independent Wheelchair Transfers in the Built Environment: How Transfer Setup Impacts Performance Phase 2: Final Report
Independent Wheelchair Transfers in the Built Environment: How Transfer Setup Impact Performance Phase 2: Final Report REPORT PREPARED FOR: U.S ACCESS BOARD, WASHINGTON,...
-
B. Question 2: Section 904.4.1 and Clear Counter Space
Defendants have satisfied 904.4.1’s length requirement if their transaction counter, as built, equals or exceeds 36 inches in length. An entity does not violate the length...
-
Grainger Tough Guy Stainless Steel Sanitary Napkin Receptacle, 11" Height
Stainless Steel Sanitary Napkin Receptacle, 11" Height, 1 EA Item# 1ECK9 Mfr....
-
407.3.3.1 Height
The device shall be activated by sensing an obstruction passing through the opening at 5 inches (125 mm) nominal and 29 inches (735 mm) nominal above the finish floor.
-
811.3 Height
Storage elements shall comply with at least one of the reach ranges specified in 308. [ECTCR UFAS 4.34.6.10(2)]
-
1008.3.2.2 Height
Each transfer step shall be 8 inches (205 mm) high maximum.
-
407.2.1.1 Height
Call buttons and keypads shall be located within one of the reach ranges specified in 308, measured to the centerline of the highest operable part. EXCEPTION: Existing call...
-
407.4.6.4.1 Height
Emergency control buttons shall have their centerlines 35 inches (890 mm) minimum above the finish floor.
-
611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (915 mm) maximum above the finish floor. Front loading machines shall have the bottom of the...
-
1008.3.2.2 Height
Each transfer step shall be 8 inches (205 mm) high maximum.
-
407.4.6.4.1 Height
Emergency control buttons shall have their centerlines 35 inches (890 mm) minimum above the finish floor.
-
309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in 308.
-
407.3.3.1 Height
The device shall be activated by sensing an obstruction passing through the opening at 5 inches (125 mm) nominal and 29 inches (735 mm) nominal above the finish floor.
-
309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in 308.
