When wheelchair spaces are dispersed vertically in an assembly facility they are placed at different locations within the seating area from front-to-back so that the distance from the screen...
Search Results "Back Support"
-
221.2.3.2 Vertical Dispersion
-
Scoping [4.1.2(1), 4.1.3(1)] and Location [4.3.2]
Signage may be necessary along routes to minimize confusion or back-tracking....
-
PLANNING
greatest impact on people with disabilities include: • notification; • evacuation; • emergency transportation; • sheltering; • access to medications, refrigeration, and back-up...
-
Segway Human Transporter
When a person leans forward, the Segway HT moves forward; leaning backward causes it to move back....
-
11B-213.3.4 Lavatories
Since the CBC path of travel obligation to remove existing barriers only allows "safe harbor" dating back to the "immediately preceding edition" (see 11B-202.4, Exception 2), existing facilities...
-
Grab Bars
Grab bars must be perpendicular to the pool wall and extend the full width of the wall so a person can use them for support into the water....
-
Acknowledgments
Thanks to MTDC’s publication and photography staffs, especially Sunni Bradshaw, for technical support and to Deb Mucci for design drawings....
-
704.10 Vertical exposure
the roof construction has a fire-resistance rating of not less than 1 hour for a minimum distance of 10 feet (3048 mm) from the adjoining building and the entire length and span of the supporting...
-
C.3.ii. - Do vendors have to provide product documentation in alternate formats?
Section 1194.41 of the Access Board's standards provides that product support documentation that is provided to end-users must be made available in alternate format upon request....
-
105.2.2 ASME
require that at least two flat steps be provided at the entrance and exit of every escalator and that steps on escalators be demarcated by yellow lines 2 inches wide maximum along the back...
-
Section 35.151(g)(4)
where the vertical viewing angles are between the 40th to 100th percentile of vertical viewing angles for all seats in that theater as ranked from the first row (1st percentile) to the back...
-
Section 36.406(f)(4)
where the vertical viewing angles are between the 40th and 100th percentile of vertical viewing angles for all seats in that theater as ranked from the first row (1st percentile) to the back...
-
105.2.2 ASME
require that at least two flat steps be provided at the entrance and exit of every escalator and that steps on escalators be demarcated by yellow lines 2 inches wide maximum along the back...
- National AgrAbility Project
-
Hologic, Inc.
During a prone biopsy procedure (Figure 1), the patient lies in the prone position on a cushioned table, with her breast positioned beneath the patient support surface while the physician...
-
4. Exception from the Requirements of M301 for Certain Examination Chairs that Comply with M302
The Access Board proposed in M101.2 in the MDE NPRM to require diagnostic equipment to meet the standards for each patient position supported, meaning that if diagnostic equipment was designed...
-
M301.2.1, M302.2.1 Transfer Height
height of the transfer surface shall have a lower height of 21" maximum and adjustable to a higher height of 25" minimum, measured from the floor to the uncompressed height of the patient support...
- Nova Health Products LiteRamp 6' Wheelchair and Scooter Ramp (LR6)
- Landscape Forms Inc. Gus Bench Collection
- Berlin Design Research Lab Mobile Lorm Glove Prototype
- Inclusion Solutions ADA Parking Mat
- NuStep T4r Recumbent Cross Trainer
-
Covered Content on Primary Web Sites
Commenters who supported flexibility and carrier choice also expressed the view that fewer compliance options would inhibit carrier innovation and use of new technologies, limit Web site...
- Gamco Surface-Mounted Robe Hook Satin - 76717