1.2 Compliance with New Construction Requirements: The basic work of any project, whether new construction, an addition to an existing building or facility or an alteration of an existing...
Search Results "Anthropometry of Wheeled Mobility Project"
Filters
Commonly Searched Documents
-
1.2 Compliance with New Construction Requirements
-
Overview
Overview People with mobility, circulatory, respiratory, or neurological disabilities use many kinds of devices for mobility. Some use walkers, canes, crutches, or braces....
-
2. VOLUNTARY SUBMITTAL:
This interpretation does not preclude a design professional or school district from choosing to submit plans and specifications with the appropriate fee to DSA for review, even when the project...
-
1.2
DSA review and approval is not required for alteration or reconstruction projects to school buildings governed by the Field Act with an estimated construction cost greater than $103,300,...
-
§8.32(d)
purposes of this section, section 4.1.4(11) of UFAS may not be used to waive or lower the minimum of five percent accessible units required by §8.22(b) or to apply the minimum only to projects...
-
4.8.7 Edge Protection
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp....
-
4.8.7 EDGE PROTECTION
Ramps and landings with drop-offs shall have curbs, walls, railings, or projecting surfaces that prevent people from slipping off the ramp....
-
3.5 Upgrades in Substantially Compliant Facilities
3.5 Upgrades in Substantially Compliant Facilities: For projects where the path of travel elements serving the area of alteration, addition or structural repair are largely compliant, it...
-
ADAAG: ADA Standard Section 2004
This of the ADA Standards covers the definition of the 2004 ADDAG.
-
Flange way gap
For rail projects, no flange way gap can be greater than 2.5" where passenger circulation paths cross tracks at grade (i.e. a street-level pedestrian crossing over streetcar tracks)....
-
Visual Detection of Detectable Warning Materials by Pedestrians with Visual Impairments - Final Report
(Task Order 18 under Project DTFH61-01-C-00049) Authors: James Jenness & Jeremiah Singer May 24, 2006 Prepared for: Federal Highway Administration Washington, DC Prepared...
-
§ 38.159(d)(7) Seat belt and shoulder harness
For each wheelchair or mobility aid securement device provided, a passenger seat belt and shoulder harness, complying with all applicable provisions of the Federal Motor Vehicle Safety Standards...
-
TALK TO ME | Physical Disability Awareness
Requires the Registered User plan or above. Login! -
Clearances Around Gripping Surfaces
ensure sufficient space for a person to grasp the grab bar: 1½ inches absolute clearance between grab bars and the adjacent wall surfaces; 1½ inches minimum clearance between grab bars and projecting...
-
I. BACKGROUND
The project design phase for the Middletown Road Station renovations was completed by an NYCTA design team in 2007. Pls.’ Responses ¶ 29....
-
Common Problems Arising in the Installation of Accessible Pedestrian Signals
Barlow, COMS (Certified Orientation and Mobility Specialist) Accessible Design for the Blind 3 Manila Street Asheville, NC 28806 Phone: 770-317-0611 Email: jmbarlow@accessforblind.org...
-
AccessRec All Terrain PVC Beach Chairs
Our two chairs are made of durable PVC construction and non-corrosive wheels....
-
Accessibility Guidebook for Outdoor Recreation and Trails
Janet Zeller, National Accessibility Program Manager Ruth Doyle, Cibola National Forest Recreation, Engineering, Archaeology, Lands, and Minerals Staff Officer Kathleen Snodgrass, Project...
-
SPOKES Unlimited
The name SPOKES comes from the belief that peer support and the sharing of information will eliminate the need to reinvent the wheel....
-
Free-Standing Overhead Lifts
While not as portable as floor lifts with wheels, these lifts are movable and can be relocated as needs or services change. 3....
-
A4.5.3 Carpet
Carpeting designed with a weave that causes a zig-zag effect when wheeled across is strongly discouraged....
-
Roughness Measurement
The surface profiles were measured with a custom-built pathway measurement tool (PathMeT), which was created from a power WC frame that was instrumented with a wheel encoder and an Acuity...
-
1.1.16 Alternate measurement tools
The waviness index method is described in ASTM E 1486, Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria....
-
§ 38.75(b)
(b) Where designated wheelchair or mobility aid seating locations are provided, signs shall indicate the location and advise other passengers of the need to permit wheelchair and mobility...
