Durable, 22-gauge galvanized steel with exposed surface, type 304 satin-finish stainless steel cover having #4 satin-finish vertical grain with black plastic trim, automatic sensor, dual...
Search Results "Vertical Reference Plane"
-
Bobrick TrimLineSeries ADA Surface-Mounted Hand Dryer B-7128.230V
-
Confirm Proper Functioning of the Audible Walk Indication
If the Walk indication is a speech message, confirm that it refers to the correct street and is appropriately worded and understandable....
-
410.6.3.1 PSTN (Section-by-Section Analysis)
proposes that, where ICT with real-time two-way voice communication interoperates with the publicly switched telephone network (PSTN), real-time text conform to TIA 825-A (incorporated by reference...
-
Trail Constructed Feature
For a listing of trail constructed features, refer to the trail documentation available at http://www.fs.fed.us/recreation/programs/trail-management/index.shtml or available to Forest Service...
-
A7.3 Check-out Aisles
Section 7.2 refers to counters without aisles; section 7.3 concerns check-out aisles....
-
Dimensional Tolerances [3.2]
Information on specific tolerances may be available from industry or trade organizations, code groups and building officials, and published references....
-
Accessible Classroom Style
This set-up is very helpful when participants need a surface to take notes and refer to materials....
-
Clear Floor or Ground Space and Turning Space
Provisions throughout the standards reference these basic “building block” requirements....
-
Disabled or handicapped or ??? Which terms should be used?
It is also important to understand that there are negative connotations to the term "handicapped" when referring to a person who has a disability....
-
11B-810.2.3 Connection
shall provide a detectable transition between the boarding/alighting area and the roadway; the detectable transition shall consist of a curb with the face sloped at 35 degrees maximum from vertical...
-
Handrail Extensions
Other specifications regarding vertical supports are not addressed by ADDAG, but may be addressed in local building codes....
-
Tread Obstacles on Trails
Height of tread obstacles must be measured vertically from the trail tread surface to the highest point of the obstacle....
-
Scoping [4.1.3(4)]
Stairs do not have to comply where vertical access (ramp, elevator, or lift) is provided....
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding 5 lb Weight - Side Approach Power Chair
represented as the percentage of users able to retrieve and place a 5 lb object on a target shelf in the lateral or sideways reach direction for a given (a) height from the floor (shown the vertical...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding 5 lb Weight - Side Approach Scooter
represented as the percentage of users able to retrieve and place a 5 lb object on a target shelf in the lateral or sideways reach direction for a given (a) height from the floor (shown the vertical...
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding 5 lb Weight - Side Approach Manual Wheelchair
represented as the percentage of users able to retrieve and place a 5 lb object on a target shelf in the lateral or sideways reach direction for a given (a) height from the floor (shown the vertical...
-
Can access be provided after construction based on need?
Vertical access to work stations in courtrooms, such as judges’ benches, can be provided after construction if space and other requirements are met to ease later installation of necessary...
-
§ 38.159(b)(7) Platform gaps
the inner barrier (if applicable) down or retracted, gaps between the forward lift platform edge and the vehicle floor shall not exceed 1/2 inch (13 mm) horizontally and 5/8 inch (16 mm) vertically...
-
11B-810.2.3 Connection
shall provide a detectable transition between the boarding/alighting area and the roadway; the detectable transition shall consist of a curb with the face sloped at 35 degrees maximum from vertical...
-
11B-810.2.3 Connection
shall provide a detectable transition between the boarding/alighting area and the roadway; the detectable transition shall consist of a curb with the face sloped at 35 degrees maximum from vertical...
-
303.3 Beveled
A change in level of 1/2 inch (13 mm) is permitted to be 1/4 inch (6.4 mm) vertical plus 1/4 inch (6.4 mm) beveled....
-
405.9 Edge Protection
Edge protection shall not be required on the sides of ramp landings having a vertical drop-off of ½ inch (13 mm) maximum within 10 inches (255 mm) horizontally of the minimum landing area...
-
Water Closet Clear Floor Space
In addition, the new ANSI A117.1 standard includes a reference to sanitary napkin disposal units. Response....
-
R205 Alternate Pedestrian Access Routes
construction, alterations, maintenance operations, or other conditions, an alternate pedestrian access route complying with sections 6D.01, 6D.02, and 6G.05 of the MUTCD (incorporated by reference...