Sidewalks not exceeding a 5% slope (with a 2% side slope) Passenger loading zone with zero clearance exterior route for people using mobility devices....
Search Results "Occupant Load"
2010 ADA Definition
Occupant Load: The number of persons for which the means of egress of a building or portion of a building is designed.
Filters
Commonly Searched Documents
-
Exterior Features
-
Site Arrival Points: ADA Standard Section 206.2.1
Section 206.2.1 covers the scoping requirements for site arrival points of accessible routes in the most current ADA Standards.
-
233.3.1.2 Facilities Containing Emergency Transportable Housing Units, F233.4.1.2 Facilities Containing Emergency Transportable Housing Units
Where emergency transportable housing units are installed on private sites provided by the occupant of the unit, the final rule requires entities to provide units with mobility features...
-
1010.1.7 Thresholds
In occupancy Group R-2 or R-3, threshold heights for sliding and side-hinged exterior doors shall be permitted to be up to 7¾ inches (197 mm) in height if all of the following apply:...
-
11B-215.1 General
Consult local fire departments and prepare evacuation plans taking into consideration the needs of every building occupant, including people with disabilities. ◼ ETA Editor’s Note...
-
1007.3 Stairways
The areas of refuge are not required in Group R-2 occupancies....
-
11B-603.2.3 Door swing
Doors to a toilet room or bathing room for a single occupant accessed only through a private office and not for common use or public use shall be permitted to swing into the clear floor...
-
11B-404.2.9 Door and gate opening force
Powered doors serving a building or facility with an occupancy of 150 or more shall be provided with a back-up battery or back-up generator....
-
PLACE OF PUBLIC ACCOMMODATION
i) An inn, hotel, or motel; or (ii) A facility that (A) Provides guest rooms for sleeping for stays that primarily are short-term in nature (generally 30 days or less) where the occupant...
-
Magnuson Group RETTO Outdoor Waste Receptacle
Designed by Mattiussi Ecologia Spa, RETTO is a sturdy, front-loading receptacle with 26-gallon capacity that combines strong functional elements and rectilinear design....
-
Tork Foam Soap Dispenser, Stainless Steel
Easy to load, high capacity refill: 2,500 doses (0.4 ml per dosage). Enclosed system avoids cross contamination....
-
Horton ProSlide™-Blast Sliding Door System
military requirements: UFC 4-010-01 anti-terrorism standards for blast resistance ASTM F2248-03 standard practice for specifying an equivalent 3-second duration during design loading...
-
AJW Architectural Products UG130-Railing UG130X-Y108 108" Exposed Flange, 1.5" Diameter Grab Bar, Peened Grip - Configuration Y
Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
-
AJW Architectural Products UG3-Railing UG3X-Y108 108" Concealed Snap Flange, 1.5" Diameter, Peened Grip - Configuration Y
Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
-
AJW Architectural Products UG120-Railing UG120X-Y108 108" Exposed Flange, 1.25" Diameter, Peened Grip - Configuration Y
Strength: Bars with a 1 1/2" offset clearance will support loads in excess of 900lbs when properly installed....
-
F206.2.1 Site Arrival Points
At least one accessible route shall be provided within the site from accessible parking spaces and accessible passenger loading zones; public streets and sidewalks; and public transportation...
-
1(2)(a)(i) Individual building test
For purposes of these guidelines, vehicular or pedestrian arrival points include public or resident parking areas; public transportation stops; passenger loading zones; and public streets...
-
Alterations
“Technically infeasible” is defined as something that has little likelihood of being accomplished because existing structural conditions would require removing or altering a load-bearing...
-
ENDNOTES
vi The Access Board, ADAAG Standards, www.accessboard.gov/adaag/#4.6 4.6 Parking and Passenger Loading Zones vii Mace, FAIA, Ronald L.,(1998), Center for Universal Design and The North...
-
Free Technical Assistance
ADA Standards for Accessible Design (28 CFR Part 36): § 4.1.6 Alterations; § 4.1.2 Accessible Sites and Exterior Facilities: New Construction, § 4.1.6 Parking and Passenger Loading...
-
Rakks® Wall Mounted Standards with Rakks® Brackets
Brackets should be mounted at least 6″ from the top of the standard to better distribute the load. Shelf brackets can be mounted at the very bottom of a standard....
-
HEWI Stationary Support Rail Duo WARM TOUCH
- made of environmentally friendly, chrome-look coated polyamide - with two gripping levels arranged above each other - bottom rail is merged with the top rail at an angle of 135° - loading...
-
Mega Jailhouse Anti-Ligature Toilet Paper Holder With Exposed Mount
This anti-ligature toilet paper holder is fabricated with one-piece construction and consists of a stainless steel rod with a pivoting ball joint that releases under excessive load. ...
-
Bobrick Swing-Up Grab Bar B-4998
Swing-up grab bar can support loads in excess of 250 pounds (113kg) if properly installed, complying with barrier-free accessibility guidelines (including ADAAG in the U.S.A.) for structural...
