The lever or lever of actuated latches or locks shall be curved with a return to within ½ inch (12.7 mm) of the door to prevent catching on the clothing of persons during egress in Group...
Search Results "Self-Latching Device"
-
1132A.8.1 Lever-type hardware
-
1132A.8.1 Lever-type hardware
The lever or lever of actuated latches or locks shall be curved with a return to within ½ inch (12.7 mm) of the door to prevent catching on the clothing of persons during egress in Group...
-
CRL-Blumcraft® Access Control Handles 08 7100
These elegant tubular devices give you maximum viewing area and a contemporary look, while remaining A.D.A. compliant....
-
404.2.8.1 Door Closers and Gate Closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
Outdoor Rinsing Showers [1011.2, 1011.3, and 1011.7]
The clear ground space must be centered on the shower head to enable people using mobility devices to turn in the space while rinsing....
-
4.13.10* Door Closers
closer, then the sweep period of the closer shall be adjusted so that from an open position of 70 degrees, the door will take at least 3 seconds to move to a point 3 in (75 mm) from the latch...
-
4.13.10* DOOR CLOSERS
closer, then the sweep period of the closer shall be adjusted so that from an open position of 70 degrees, the door will take at least 3 seconds to move to a point 3 in (75 mm) from the latch...
-
ASI Storage Solutions Plastic Lockers
length, powder coated, continuous hinge for smooth operation Rabbeted joinery with stainless steel locking pins for long term integrity Backed by a 15-year warranty Self-locking...
-
11B-404.2.8.1 Door closers and gate closers
Door closers and gate closers shall be adjusted so that from an open position of 90 degrees, the time required to move the door to a position of 12 degrees from the latch is 5 seconds minimum...
-
(1)(e)
Door latches and hardware should be operable with one hand and should not require tight grasping, pinching, or twisting of the wrist....
-
Participants
The target sample populations were individuals who live in the community and use a wheeled mobility device, as well as having the ability to transfer independently and represent a broad...
-
Allegion LCN 1460 Series Surface Mounted Door Control
UL and cUL listed for self-closing doors without hold-open. Tested and certified under ANSI Standard A156.4, grade one....
-
B. Door Maneuvering Clearance
for a person who uses a wheelchair to approach the restroom door from the pull side and pull it open without it hitting the wheelchair - this requires at least 18" of wall space on the latch...
-
4.17.5* Doors
If toilet stall approach is from the latch side of the stall door, clearance between the door side of the stall and any obstruction may be reduced to a minimum of 42 in (1065 mm) (Fig. 30...
-
§100.142(a)(1)
(1) The report or results of the self-test;...
-
404.2.4.2 Doorways without Doors or Gates, Sliding Doors, and Folding Doors
Sliding Doors, and Manual Folding Doors Minimum Maneuvering Clearance Approach Direction Perpendicular to Doorway Parallel to Doorway (beyond stop/latch...
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
DOORS Minimum Maneuvering Clearance Approach direction Perpendicular to doorway Parallel to doorway (beyond stop/latch...
-
Signage
Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
DOORS MINIMUM MANEUVERING CLEARANCE Approach direction Perpendicular to doorway Parallel to doorway (beyond stop/latch...
-
ELECTRIC VEHICLE (EV)
For the purpose of this code, off-road, self-propelled electric vehicles, such as industrial trucks, hoists, lifts, transports, golf carts, airline ground support equipment, tractors, boats...
-
ELECTRIC VEHICLE (EV)
For the purpose of this code, off-road, self-propelled electric vehicles, such as industrial trucks, hoists, lifts, transports, golf carts, airline ground support equipment, tractors, boats...
-
1132A.8.1 Lever-type hardware
The lever or lever of actuated latches or locks shall be curved with a return to within ½ inch (12.7 mm) of the door to prevent catching on the clothing of persons during egress in Group...
