Storage elements shall comply with at least one of the reach ranges specified in Section 11B-308.
Search Results "Bench Height"
-
11B-811.3 Height
-
11B-407.2.1.1 Height
Call buttons and keypads shall be located within one of the reach ranges specified in Section 11B-308, measured to the centerline of the highest operable part. Exception:...
-
11B-407.3.3.1 Height
The device shall be activated by sensing an obstruction passing through the opening at 5 inches (127 mm) nominal and 29 inches (737 mm) nominal above the finish floor.
-
11B-407.4.6.4.1 Height
Emergency control buttons shall have their centerlines 35 inches (889 mm) minimum above the finish floor.
-
11B-1008.3.2.2 Height
Each transfer step shall be 8 inches (203 mm) high maximum.
-
11B-309.3 Height
Operable parts shall be placed within one or more of the reach ranges specified in Section 11B-308.
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor. Front loading machines shall have the bottom of the...
-
CHAPTER 5 GENERAL BUILDING HEIGHTS AND AREAS
ETA Editor's Note Sections from California Building Code Chapter 4 that are not adopted by Division of the State Architect - Access Compliance (DSA-AC) have been omitted. To...
-
CHAPTER 5 GENERAL BUILDING HEIGHTS AND AREAS
ETA Editor's Note Sections from California Building Code Chapter 4 that are not adopted by Division of the State Architect - Access Compliance (DSA-AC) have been omitted. To see...
-
5.4.3.1 Positioning Support Height Recommendation for Imaging Equipment with Transfer Surfaces
5.4.3.1 Positioning Support Height Recommendation for Imaging Equipment with Transfer Surfaces For imaging equipment with transfer surfaces, the Committee recommends a positioning support...
-
M305.1 General
Supports shall comply with M305.
-
M305.1 General (Section-by-Section Analysis)
This is an introductory section.
-
Accessible Medical Equipment
Importance of Accessible Examination Tables, Chairs and Weight Scales http://www.hfcdihp.org/products Exam Room Selection for Accessible Examination Tables & Chairs PDF...
-
M305.1 General
Supports shall comply with M305, as applicable.
-
General: ADA Standard Section 226.1
Section 226.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for dining surfaces and work surfaces.
-
Access-Able Designs Rear Mount Tub Transfer Bench w/o Legs SH-414
Rests on tub wall to allow 17-19" height. This seat requires a minimum of 2" tub ledges to rest on (both sides). Folds up easily when not in use....
-
American Standard Cadet 1.1 gpf FloWise Right Height Pressure Assisted Elongated Toilet 2467100
Combination bowl and tank, less seat 12" (305mm) rough EverClean® Surface Elongated bowl Pressure-assisted siphon jet flush action 16-1/2" rim height...
-
Amusement Rides
Word Fillable Form (0.8MB) Word Non-Fillable Form (0.7MB) PDF Non-Fillable Form (0.5MB)
-
American Standard Yorkville 1.1 gpf FloWise Right Height Elongated Pressure Assisted Toilet
Connect® tank/bowl coupling system 4 bolt caps Sanitary bar on bowl Recommended working pressure range 25 psi - 80 psi Specs Dimensions Height...
-
Spectrum Industries Inc. Freedom XRS Elite Lectern™ Adjustable Height Lecterns
Adjustable Height Lecterns Having a lectern have the ability to move up and down easily makes it useful for everyone on staff....
-
Kompan, Inc. M584P - Starfish Tables and Benches
Requires the Premium User plan or above. (Login or upgrade your account!) -
Kompan, Inc. Tables and Benches - ELE400205 - Cottage
Requires the Premium User plan or above. (Login or upgrade your account!) -
American Standard Right Width 1.28-1.6 gpf FloWise Right Height Elongated Flushometer Toilet
Specs Dimensions Height - 17-1/8" Width - 17" Depth - 28-1/4" Innovation Water Efficient - Conserving water is as important...
