Our automated sidewalk assessment process focuses on four areas of liability: Tripping Hazards Curb Ramps Cross Slopes Critical Features When we...
Search Results "Warning Curb"
-
Beneficial Designs Public Rights of Way Assessment Process (PROWAP)
-
11B-705.2 Detectable directional texture
This surface will be placed directly behind the yellow detectable warning texture specified in Section 11B-705.1.2.1, aligning with all doors of the transit vehicles where passengers will...
-
11B-215.1 General
Facility alarm systems (other than fire alarm systems) such as those used for tornado warnings and other emergencies are not required to comply with the technical criteria for alarms in...
-
A4.28.4 AUXILIARY ALARMS
Locating visual emergency alarms in rooms where deaf individuals may work or reside alone can ensure that they will always be warned when an emergency alarm is activated....
-
Bicycle Trailers
Safety recommendations in several sources include installing a highflying fluorescent warning flag to increase visibility, allowing plenty of stopping distance, and using caution when maneuvering...
-
11B-215.1 General
Facility alarm systems (other than fire alarm systems) such as those used for tornado warnings and other emergencies are not required to comply with the technical criteria for alarms in...
-
11B-705.2 Detectable directional texture
This surface will be placed directly behind the yellow detectable warning texture specified in Section 11B-705.1.2.1, aligning with all doors of the transit vehicles where passengers will...
-
Standards that exclude an entire class of individuals with disabilities
The individual evaluation should take into account the type of job, the degree of seizure control, the type(s) of seizures (if any), whether the person has an "aura" (warning of seizure)...
-
How to Use the Pressure Gauge Tool
WARNING - We have stopped carrying the HMC International spring-type door pressure gauges shown in the video because the last two large shipments we received were all exactly one pound off...
-
Chapter 4: Accessible Routes
4 contains technical requirements for accessible routes (402) and the various components of such routes, including walking surfaces (403), doors, doorways and gates (404), ramps (405), curb...
-
Components (R302.2) (Section-by-Section Analysis)
Curb ramps and blended transitions must comply with the technical requirements in R302.7 and R304. Ramps must comply with the technical requirements in R407....
-
ALTERNATIVES TO BARRIER REMOVAL
Examples of alternatives to barrier removal include, but are not limited to, the following actions -- §36.305(b)(1) Providing curb service or home delivery; §36.305(b)(2) Retrieving...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
303.3 Beveled
Changes in level exceeding 1/2 inch (13 mm) must comply with 405 (Ramps) or 406 (Curb Ramps)....
-
Protruding Objects and Outdoor Recreation Access Routes
Edge protection is a raised curb, wall, railing, or other structure that defines the edge of a travel surface and may help keep people on the travel surface....
-
Lift-U® LU12 Step/Platform Onboard Lift
platform is off the ground and meets 1600 pound force requirement Interlocked outboard barrier Handrails capable of withstanding 250 pounds of force in any direction Threshold warning...
-
10.2.1(1)
are constructed at bus stops, bays or other areas where a lift or ramp is to be deployed, they shall have a firm, stable surface; a minimum clear length of 96 inches (measured from the curb...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
11B-303.3 Beveled
Changes in level exceeding 1/2 inch (13 mm) must comply with Sections 11B-405 (Ramps) or 11B-406 (Curb Ramps). ◼ ...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
308 Reach Ranges
Gas pumps are often located on curbs at least 6 inches high for safety reasons....
-
Wayfinding is more than just graphics (slides 2 – 4)
Emergency warnings. I was reading the emergency exit plan in the hotel last night, and it had a line that said, “The emergency warning sounds like, ‘Woo, woo.’”...
