Operable parts of fuel dispensers shall be permitted to be 54 inches (1372 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
Search Results "Warning Curb"
Commonly Searched Documents
-
11B-308.3.1 Unobstructed
-
11B-303.3 Beveled
Changes in level exceeding 1/2 inch (13 mm) must comply with Sections 11B-405 (Ramps) or 11B-406 (Curb Ramps). ◼ ...
-
1005.3 Edge Protection
In such a design, curbs or barriers are not required....
-
1005.3 Edge Protection
In such a design, curbs or barriers are not required....
-
Section 2. Accessible route
Exterior accessible routes may include parking access aisles, curb ramps, walks, ramps and lifts....
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
1005.3 Edge Protection
In such a design, curbs or barriers are not required....
-
§100.201 Accessible route
Exterior accessible routes may include parking access aisles, curb ramps, walks, ramps, and lifts....
-
QUESTION: WHAT CONSTITUTES AN ALTERATION TO A PLATFORM FOR PURPOSES OF TRIGGERING THE APPLICATION OF SECTION 37.42 REQUIREMENTS?
., adding a detectable warning strip along a platform edge, installing a public address system or visual paging system) would also not constitute an alteration....
-
12. Annual Commitment for Program Access Improvements
(c) For the first year of the Compliance Period, Five Million Dollars ($5,000,000) of the Annual Commitment shall be allocated to construction and development relating to curb ramp or curb...
-
11B-1005.3 Edge protection
In such a design, curbs or barriers are not required....
-
Q6.) How important is the method of measurement in considering the tolerances allowable in finished construction?
For ramps and curb ramps, DOJ has issued two technical assistance documents that show how to measure slopes. ...
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
Compliance requirements
address the design, construction, and alteration of pedestrian facilities in the public right-of-way, including sidewalks, pedestrian street crossings, pedestrian overpasses and underpasses, curb...
-
Withdrawal of Outstanding NPRMs
of the Department and the Access Board dealing with children's facilities, published on July 22, 1996, at 61 FR 37964; the Department's proposal to extend the time period for providing curb...
-
Withdrawal of Outstanding NPRMs
of the Department and the Access Board dealing with children's facilities, published on July 22, 1996, at 61 FR 37964; the Department's proposal to extend the time period for providing curb...
-
25. Need for Return Trip Assistance
For example, a dialysis patient may have no problem waiting at the curb for a ride to go to the dialysis center, but may well require assistance to the door on his or her return trip because...
-
§ 37.43(d)
An accessible path of travel may include walks and sidewalks, curb ramps and other interior or exterior pedestrian ramps, clear floor paths through corridors, waiting areas, concourses,...
-
11B-1005.3 Edge protection
In such a design, curbs or barriers are not required....
-
25. Need for Return Trip Assistance
For example, a dialysis patient may have no problem waiting at the curb for a ride to go to the dialysis center, but may well require assistance to the door on his or her return trip because...
-
11B-1005.3 Edge protection
In such a design, curbs or barriers are not required. ◼...
- Inpro ENDURANT® Shower Receptors
-
Parking sign height measurement technique
The parking surface or the surface directly under the sign, if different (such as a curb or landscaping)? The only way for uniformity would be from the parking surface, right? ...
-
A4.6.3 Parking Spaces
The parking access aisle must either blend with the accessible route or have a curb ramp complying with 4.7....