High Volumes of Consumers, High Value Services A store packed with shoppers is a merchant's dream....
Search Results "High Speed Rail"
- Verifone MX 860 Point of Sale Machine with Credit Card Reader
-
Commuter Authority
The definition of "commuter authority" includes a list of commuter rail operators drawn from a statutory reference in the ADA. It should be noted that this list is not exhaustive....
-
a. The employer's judgment
For example: If an employer requires its typists to be able to accurately type 75 words per minute, the employer is not required to show that such speed and accuracy are "essential" to a...
-
Subtitle B: Public Transportation
The transportation provisions of title II cover public transportation services, such as city buses and public rail transit (e.g. subways, commuter rails, Amtrak)....
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high....
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high....
-
R308.1.3.1 Surfaces
Detectable warning surfaces are required at boarding and alighting areas for rail vehicles and at boarding platforms for buses and rail vehicles (see R208)....
-
Minimum Green Times
AASHTO equation addresses three factors in its calculation of minimum green time for signalized intersections: perception-reaction time, acceleration time, and travel time at the design speed...
-
R305 Detectable Warning Surfaces (Section-by-Section Analysis)
At pedestrian at-grade rail crossings not located within a street or highway, detectable warning surfaces must extend the full width of the crossing....
- Guldmann GH1 F Lifting Module
-
1015.3 Height
Required guards shall not be less than 42 inches (1067 mm) high, measured vertically as follows: From the adjacent walking surfaces....
-
1015.3 Height
Required guards shall not be less than 42 inches (1067 mm) high, measured vertically as follows: From the adjacent walking surfaces....
-
R302.7.1 Vertical Alignment
Where pedestrian access routes cross rails at grade, the pedestrian access route surface shall be level and flush with the top of rail at the outer edges of the rails, and the surface between...
-
Edge Protection [4.8.7]
Horizontal rails are another alternative although mounting heights are not specified (the 27 inch height in ADAAG Figure 17 pertains to the return of extensions as protruding objects)....
- Beneficial Designs High Efficiency Trail Assessment Process (HETAP) Software 3.0 Wheeled Instrumentation Sensor Package for Data Collection
-
Trailers with Two Wheels
These trailers do not track behind the bicycle well, resulting in reduced maneuverability, especially at higher speeds....
-
12162(a)(3)(A) General rule
(A) General rule It shall be considered discrimination for purposes of section 12132 of this title and section 794 of title 29 for a person who provides intercity rail transportation...
-
12162(d)(2) Purchase or lease
2) Purchase or lease It shall be considered discrimination for purposes of section 12132 of this title and section 794 of title 29 for a person to purchase or lease a remanufactured rail...
-
1005.4 Clear Floor or Ground Space
At each location where there are railings, guards, or handrails complying with 1005.2.1, a clear floor or ground space complying with 305 shall be provided....
-
§ 37.81(b)
(b) A public entity may purchase or lease a used rapid or light rail vehicle for use on its rapid or light rail system that is not readily accessible to and usable by individuals if, after...
-
1005.4 Clear Floor or Ground Space
At each location where there are railings, guards, or handrails complying with 1005.2.1, a clear floor or ground space complying with 305 shall be provided....
-
FOREWORD
Quality Assurance Statement The Federal Highway Administration (FHWA) provides high-quality information to serve Government, industry, and the public in a manner that promotes public...
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....
-
11B-303.4 Ramps
Changes in level greater than ½ inch (12.7 mm) high shall be ramped, and shall comply with Section 11B-405 or 11B-406....