Model 4721-15, 4722-1015, 4722-15 Satin finish stainless steel Models 4721-15, 4722-15, 4731-15 available BradEX 4721-15 partition mounted, serves 2 compartments...
Search Results "Compartment Hardware"
Commonly Searched Documents
- Bradley Standard Series Napkin Disposal
-
Clearance: ADA Standard Section 608.2.2.1
Section 608.2.2.1 covers the current ADA Standards for the clearances of standard roll-in type shower compartments.
-
3.3. Scoping Requirements
This section outlines the estimated number of hardware units and individual devices required for each venue type. ...
-
213, 603, 604, and 608 Toilet and Bathing Facilities, Rooms, and Compartments
[See subsections ...]
-
11B-608.7 Thresholds
Thresholds in roll-in type shower compartments shall be ½ inch (12.7 mm) high maximum in accordance with Section 11B-303. [2010 ADAS] 608.7 Thresholds. ...
-
11B-608.7 Thresholds
Thresholds in roll-in type shower compartments shall be ½ inch (12.7 mm) high maximum in accordance with Section 11B-303. [2010 ADAS] 608.7 Thresholds....
-
608.7 Thresholds
Thresholds in roll-in type shower compartments shall be ½ inch (13 mm) high maximum in accordance with 303....
-
608.7 Thresholds
Thresholds in roll-in type shower compartments shall be ½ inch (13 mm) high maximum in accordance with 303....
-
222 Dressing, Fitting, and Locker Rooms
Where coat hooks or shelves are provided in dressing, fitting or locker rooms without individual compartments, at least one of each type shall comply with 803.5....
-
11B-608.7 Thresholds
Thresholds in roll-in type shower compartments shall be ½ inch (12.7 mm) high maximum in accordance with Section 11B-303....
-
Chapter 6: Plumbing Elements and Facilities
Chapter 6 provides criteria for drinking fountains (602), toilet and bathing rooms (603), water closets and toilet compartments (604), urinals (605), lavatories and sinks (606), bathtubs...
-
Coat Hooks and Shelves
Section 213.3.7 addresses coat hooks and shelves provided in accessible toilet rooms, toilet compartments, and bathing facilities and references corresponding technical criteria for such...
-
608.7 Thresholds
Thresholds in roll-in type shower compartments shall be 1/2 inch (13 mm) high maximum in accordance with 303....
-
1133B.2.5.2
Hardware shall be centered between 30 inches (762 mm) and 44 inches (1118 mm) above the floor....
-
1010.2.13.1 Delayed egress locking system
An attempt to egress shall initiate an irreversible process that shall allow such egress in not more than 15 seconds when a physical effort to exit is applied to the egress side door hardware...
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware. ◼...
-
1115B.3.1, Item 5
Where six or more compartments are provided within a multiple-accommodation toilet room, in addition to the water closet and compartment required by Items 3 and 4 above, provide at least...
-
Water Closets for Children's Use
In the proposed rule, this section included criteria for wheelchair accessible compartments....
-
§382.125(b)
(b) You must give wheelchairs, other mobility aids, and other assistive devices priority for stowage in the baggage compartment over other cargo and baggage....
-
11B-603.2.3 Door swing
Doors to accessible water closet compartments shall be permitted to encroach into the turning space without limitation....
-
611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (915 mm) maximum above the finish floor....
-
11B-611.4 Height
Top loading machines shall have the door to the laundry compartment located 36 inches (914 mm) maximum above the finish floor....
-
C204.1 General (Section-by-Section Analysis)
C204.1 General (Section-by-Section Analysis) This section proposes that, where covered ICT hardware transmits information or has a user interface, such hardware must conform to the applicable...