(b) Other signs which provide direction to or information about functional spaces of the building shall comply with 4.30.1, 4.30.2, 4.30.3, and 4.30.5....
Search Results "Bus Sign"
-
4.1.3(16)(b)
-
11B-216.4.2 Areas of refuge and exterior areas for assisted rescue
Signs required by Chapter 10, Section 1009.11 to provide instructions in areas of refuge shall comply with Section 11B-703.5....
-
11B-206.2.1 Site arrival points
Where two or more similar site arrival points, such as bus stops, serve the same accessible entrance or entrances, both bus stops must be on accessible routes....
-
Common Problems with Parking
Ø There are no signs, or signs are placed so they can be obstructed by parked vehicles. Ø Parking garages do not have adequate vertical clearance for vans....
-
4.30.6 Mounting Location and Height
Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
Mounting Height and Location
Section 703.4 covers the mounting height and location of signs with tactile characters....
-
11B-106.5 Defined terms
AMUSEMENT COMMON USE COMPLY WITH CROSS SLOPE CURB CUT CURB RAMP DESIGNATED PUBLIC TRANSPORTATION DESTINATION-ORIENTED ELEVATOR DETECTABLE WARNING DIRECTIONAL SIGN...
-
11B-216.11 Check-out aisles
Where more than one check-out aisle is provided, check-out aisles complying with Section 11B-904.3 shall be identified by a sign complying with Section 11B-904.3.4....
-
11B-216.11 Check-out aisles
Where more than one check-out aisle is provided, check-out aisles complying with Section 11B-904.3 shall be identified by a sign complying with Section 11B-904.3.4....
-
11B-216.11 Check-out aisles
Where more than one check-out aisle is provided, check-out aisles complying with Section 11B-904.3 shall be identified by a sign complying with Section 11B-904.3.4....
-
11B-216.6 Entrances
Directional signs complying with Section 11B-703.5 _|Signs; Visual Characters|_ that indicate the location of the nearest entrance complying with Section 11B-404 shall be provided at entrances...
-
802.4.2 Identification
Each designated aisle seat shall be identified by a sign or marker. Advisory 802.4.2 Identification....
-
802.4.2 Identification
Each designated aisle seat shall be identified by a sign or marker. Advisory 802.4.2 Identification....
-
5. If there is a significant risk, reasonable accommodation must be considered
For example: A deaf bus mechanic was denied employment because the transit authority feared that he had a high probability of being injured by buses moving in and out of the garage....
-
Section 37.25 University Transportation Systems
In the case of fixed route systems, the requirements for commuter bus service would govern....
-
QUESTION: WHAT INFORMATION ARE PVOs RESPONSIBLE FOR PROVIDING TO PASSENGERS WITH DISABILITIES CONCERNING ACCESSIBILITY MATTERS?
For example, if there is an excursion involving a tour bus, the PVO is expected to be able to inform a passenger using a wheelchair whether the bus is accessible (e.g., is equipped with...
-
Section 37.23 Service Under Contract
For the time being, a private entity operating in its own right can purchase a new over-the-road bus inaccessible to individuals who use wheelchairs....
-
11B-307.3.1 Edges and corners
Where signs or other objects are mounted on posts or pylons, and their bottom edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects...
-
11B-307.3.1 Edges and corners
Where signs or other objects are mounted on posts or pylons, and their bottom edges are less than 80 inches (2032 mm) above the floor or ground surface, the edges of such signs and objects...
-
11B-707.6.3.2 Tactile symbols
key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised plus sign...
-
802.4.2 Identification
Each designated aisle seat shall be identified by a sign or marker. Advisory 802.4.2 Identification....
-
707.6.3.2 Tactile Symbols
key surfaces shall have tactile symbols as follows: Enter or Proceed key: raised circle; Clear or Correct key: raised left arrow; Cancel key: raised letter ex; Add Value key: raised plus sign...