The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
Search Results "Wheelchair Seating Space"
Filters
Commonly Searched Documents
-
1002.5.2 Transfer Height
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
1002.4.1 Floor or Ground Surface
The floor or ground surface of wheelchair spaces shall be stable and firm....
-
610.4 Structural Strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
11B-610.4 Structural strength
Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or...
-
Purchase of multiple tickets. (Section-by-Section Analysis)
There are various ways that covered entities can accommodate groups that require at least one wheelchair space. ...
-
American Specialties Retractable Shower Seat Model 170
Requires the Premium User plan or above. (Login or upgrade your account!) -
T208.2 Connection to Doorways
A passenger access route shall connect each wheelchair space to doorways that provide a means of accessible boarding and alighting in accordance with T208.2....
-
Best Practice Recommendations for Layout Planning
If 10% or more of participants are expected to use mobility aids, plan for 30% additional space....
-
Seat width and depth
We selected 18 inches minimum seat width as a starting point with the potential to grow to 30 inches. ...
-
Seat and Row Designations
Commenters requested that seat and row designations in assembly areas be exempt from the requirements for signage....
-
Wheelchairs Unable to be Stowed in the Cabin as Carry-on
Wheelchairs Unable to be Stowed in the Cabin as Carry-on When a folding, collapsible, or break-down wheelchair cannot be stowed in the cabin as carry-on baggage, carriers must ensure...
-
Methodology
This study was approved by the University of Pittsburgh's Institutional Review Board and all participants provided informed consent before participating in any test procedures.
-
Passing Spaces on Trails
A 60-inch (1,525-millimeter) clear tread width is required for two wheelchairs to pass safely and comfortably on a trail....
-
Only Safety Affects Seat Assignments
Only Safety Affects Seat Assignments You must not exclude a passenger with a disability from any seat in an exit row or other location or require a passenger with a disability to sit...
-
§ 382.45 Passenger information
This information shall pertain to the type of aircraft and, where feasible, the specific aircraft scheduled for a specific flight: (1) The location of seats, if any, with movable armrests...
-
A. Background
The complaint alleges that in several stadiums and arenas designed and constructed by Ellerbe for first occupancy after January 26, 1993, Ellerbe has failed to provide wheelchair seating...
-
11B-1002.5 Amusement ride seats designed for transfer
[2010 ADAS] Advisory 1002.5 Amusement Ride Seats Designed for Transfer. ...
-
11B-1002.5 Amusement ride seats designed for transfer
[2010 ADAS] Advisory 1002.5 Amusement Ride Seats Designed for Transfer....
-
11B-1002.5 Amusement ride seats designed for transfer
Advisory 11B-1002.5 Amusement ride seats designed for transfer....
-
Clear Floor or Ground Space: ADA Standard Section 707.2
A clear floor or ground space complying with 305 shall be provided....
-
Exterior Spaces: ADA Standard Section 806.2.2
Exterior spaces, including patios, terraces and balconies, that serve the guest room shall be accessible. [S.H. 9.2.2(6)(d)]...
-
Technical Memorandum TM 2013-14 Dining Surfaces
Calculations At least 5% of the seating and standing spaces at fixed or built-in dining surfaces provided for the consumption of food or drink must comply with 902 based on TAS 226.2....
