The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position.
Search Results "Recreational Boating Facility"
Filters
Commonly Searched Documents
-
1002.4.2 Slope
-
Outdoor Constructed Features in Common Use and Public Use Areas [F245.4]
Where outdoor constructed features are provided in common use and public use areas that serve picnic units with mobility features, at least 20 percent, but no less than one, of each...
-
234.3 Minimum Number
Amusement rides shall provide at least one wheelchair space complying with 1002.4, or at least one amusement ride seat designed for transfer complying with 1002.5, or at least one...
-
Gates, Bars, and Berms
Forest Service-constructed barriers on pedestrian travel routes must have a 32-inch minimum width gap or include a route beside them that will permit passage of a wheelchair....
-
Stone Leg Picnic Table
STONE LEG PICNIC TABLE Contact Santa Fe NE for construction drawings ETA Editor's Note Stone Leg Picnic Table drawings: Click here to view/download CAD file |...
-
Wood Picnic Table
WOOD PICNIC TABLE Contact Santa Fe NF for construction drawings ETA Editor's Note Wood Picnic Table drawings: Click here to view/download CAD file | Click...
-
Steel Leg Picnic Table
STEEL LEG PICNIC TABLE Contact Santa Fe NE for construction drawings ETA Editor's Note Steel Leg Picnic Table drawings: Click here to view/download CAD file |...
-
234.3 Minimum Number
234.3 Minimum Number. Amusement rides shall provide at least one wheelchair space complying with 1002.4, or at least one amusement ride seat designed for transfer complying with...
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position.
-
5.3.6 Entrance
The entrance to the toilet shall be level with the surrounding surface. Exception: Where bedrock, perma-frost or other environmental conditions prohibit a level entry or the...
-
3.4.2 ORARs in Viewing Areas
Connections shall be provided between site furnishings and constructed features in viewing areas as well as between accessible viewing areas, parking areas, and accessible common use...
-
3.3.2 ORARs in Picnic Units
Connections shall be provided between site furnishings and constructed features in picnic units as well as between accessible picnic units, parking areas, and accessible common use...
-
4.3.1 General
Tent platforms are not required. Where provided, tent pads and tent platforms at single camping units shall comply with section 4.3 and shall be connected to an ORAR complying with...
-
11B-234.3 Minimum number
Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section...
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position.
-
11B-234.3 Minimum number
Amusement rides shall provide at least one wheelchair space complying with Section 11B-1002.4, or at least one amusement ride seat designed for transfer complying with Section...
-
11B-1002.4.2 Slope
The floor or ground surface of wheelchair spaces shall have a slope not steeper than 1:48 when in the load and unload position.
-
Sargent HP Bored Lock with Push/Pull Trim
The HP Series Bored Lock with ALP push/pull trim has ligature resistant features and provides an aesthetically-pleasing alternative to standard push/pull products. Ease of operation...
-
Architectural Builders Hardware Mfg., Inc. 6830 Series Time Out/Reverse Low Profile Hospital Latch
6830 Series Template - Low Profile, Reverse Latch, Cylindrical Push Pull Reverse Latch Cylindrical push/pull reverse latch 1-3/4" standard door thickness (specify if...
-
Architectural Builders Hardware Mfg., Inc. 6000 Series Wide Paddle Cylindrical Hospital Latch
LR6000 Hospital Latch Wide Paddle Cylindrical Hospital Latch 1-3/4" standard door thickness (specify if different) Meets ADA requirements
-
Architectural Builders Hardware Mfg., Inc. 6000 Series Push/Pull Hospital Latch
The 6000 Series Push/Pull Hospital Latch offers versatility and durability for commercial and institutional settings. These models are designed for commercial and institutional doors...
-
Rockwood Manufacturing Company 596S Hospital Push Pull Latch 2-3/4" Backset
Material: Stainless Steel FEATURES: • Easy to operate low-force paddle. • Non-handed (except for engraved models). • Includes Standard 161 and ASA strike. • 2-3/4", 5" or 7"...
-
Rockwood Manufacturing Company 596 Hospital Push Pull Latch 5" Backset
Material: Stainless Steel FEATURES: • Easy to operate low-force paddle. • Non-handed (except for engraved models). • Includes Standard 161 and ASA strike. • 2-3/4", 5" or 7"...
-
Don-Jo Mfg., Inc. 2-3/4" Hospital Latch 4500
Product Specifications Number 4500 Back set 2-3/4" Material Brass Size 2-3/4" x 4-1/2" Shelf...
