(f) Assembly areas. (i) In alterations where it is structurally impracticable to disperse seating throughout the assembly area, seating may be located in collected areas as...
Search Results "Wheelchair Size"
Commonly Searched Documents
-
4.1.6(4)(f)
-
5.2.1 Transfer Surface Size Recommendations for M301
5.2.1 Transfer Surface Size Recommendations for M301 Description: The transfer surface is the part of the diagnostic equipment onto which patients who use mobility devices or aids transfer...
-
M302.2.3 Size (Section-by-Section Analysis)
The MDE NPRM proposed a transfer surface size for diagnostic equipment used by patients in the seated position of 21 inches wide and 15 inches deep (proposed M302.2.2)....
-
11B-407.2.1.2 Size and shape
[2010 ADAS] 407.2.1.2 Size. Call buttons shall be ¾ inch (19 mm) minimum in the smallest dimension. Exception: Reserved....
-
11B-407.2.1.2 Size and shape
[2010 ADAS] 407.2.1.2 Size. Call buttons shall be ¾ inch (19 mm) minimum in the smallest dimension. Exception: Reserved....
-
11B-407.2.1.2 Size and shape
[2010 ADA Standards] 407.2.1.2 Size. Call buttons shall be ¾ inch (19 mm) minimum in the smallest dimension. Exception: Reserved....
- Seton Custom Sized Braille Signs L2852
-
5.2.2 Transfer Surface Size Recommendations for M302
5.2.2 Transfer Surface Size Recommendations for M302 Description: The transfer surface is the part of the diagnostic equipment onto which patients who use mobility devices or aids transfer...
-
Vertical Wheelchair Lifts
Vertical lifts are intended for people who use wheelchairs although others may be able to use them under the ASME code if a seat is provided....
-
5.2.1.3 Transfer Surface Size for Stretchers
5.2.1.3 Transfer Surface Size for Stretchers. The transfer surface should be 28 inches wide minimum and 17 inches deep minimum located on both long sides of stretchers....
- Lilypad Wheelchair Scale
-
M301.2.3 Size (Section-by-Section Analysis)
The MDE NPRM proposed a transfer surface size for diagnostic equipment used in the supine, prone, or side-lying position of 30 inches wide and 15 inches deep minimum....
-
221 Assembly Areas
Wheelchair spaces shall be located in not less than 20 percent of all boxes provided. Wheelchair spaces shall comply with 802.1....
-
Chapter 3: Study findings
[See subsections ...]
-
Wheelchair Accessible Compartment
Section 604.8 provides requirements for wheelchair accessible compartments and those that are designed to accommodate persons with disabilities who are ambulatory....
- Detecto FHD Series Stationary Wheelchair Scale
-
PLATFORM (WHEELCHAIR) LIFT
[DSA-AC] A hoisting and lowering mechanism equipped with a car or platform or support that serves two landings of a building or structure and is designed to carry a passenger or...
-
2. Roll-in Shower Size
If there are more than 50 guestrooms/suites, are all required roll-in showers at least 30" wide by 60" long or 36" wide by 60", as configured in Figure 57 below, so persons who use wheelchairs...
- Bobrick Accessibility Video -- Design for Turning Radiuses
-
Wheelchair Accessible Gates
Web sites with designs that allow wheelchair access while restricting access by ATVs and motorcycles are listed near the end of this tech tip....
- Detecto BRW1000 Portable Wheelchair Scale
-
PLATFORM (WHEELCHAIR) LIFT
PLATFORM (WHEELCHAIR) LIFT. ...