Ample vertical stanchions from ceiling to seat-back rails shall be provided....
Search Results "Vertical Standing Support"
Commonly Searched Documents
-
§ 38.57(b)
-
R210.3 Shared Use Paths
The AASHTO Guide recommends 10 feet vertical clearance along shared use paths, and 8 feet minimum vertical clearance in constrained areas....
- Equalizer 1000 Series Exercise Machine
- Pilot Rock CN-OKR Oak Knoll Collection Trash Receptacle
-
2. Analysis of footrest clearance height and depth
Analysis of footrest clearance height and depth Any base support or flange for the mammography machine at floor level (inside the clear floor space width) would obstruct some wheelchair...
-
B7-b
[ADA Standards § 4.7.2] Yes No Note: 1:12 is one inch of vertical height for each 12 inches of length....
-
1132A.4.1, Item 2
Thresholds with a change in height between ¼ inch (6.35 mm) and ¾ inch (19.05 mm) shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)....
- American Stair Corp. Standard Railings
- Outdoor Extreme Mobility Beach Cruiser Powered Wheelchair
-
Service Animal:
With respect to emotional support animals, although carriers may require documentation to verify that an animal is an emotional support animal, such documentation is not required under the...
-
Side Approach
Side Approach Clear space for a side approach is specified for units that are free-standing or built-in....
-
Detail
Some graphic objects did not stand out sufficiently from their backgrounds. The train had depth to its details, making it a successful object....
-
3.3.2 Experienced Clinicians
Because exam chairs have up-right back support, armrests, and patients do not typically need to reposition their entire body once on the equipment, a narrower minimum width of 21” is proposed...
- Pilot Rock Campfire Ring Test
-
B. Accessible Route
Is there a route to these 5% accessible fixed tables that allows at least 36" clear width and has no abrupt vertical level changes greater than 1/4"?...
-
e-ii
[ADA Standards § 4.7.2] Yes No Note: 1:12 is one inch of vertical height for 12 inches of horizontal distance....
-
§ 38.83(c)(1) Design load
Ramps or bridge plates 30 inches or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26 inches, with a safety factor...
-
5. Ground Level PV Systems
Ground Level PV Systems Ground level PV systems will have components other than vertical supports installed less than 80 inches above the ground or floor surface....
-
11B-1009.2 Pool lifts
Additional options such as armrests, head rests, seat belts, and leg support will enhance accessibility and better accommodate people with a wide range of disabilities. ◼...
-
I. Parking Garage
Does the parking garage serving the lodging facility allow at least 98" of vertical clearance for vehicles with raised roofs to approach, use and exit the accessible parking spaces?...
-
1132A.4.1, Item 2
Thresholds with a change in height between ¼ inch (6.35 mm) and 3/4 inch (19.05 mm) shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)...
-
MEANS OF EGRESS
A continuous and unobstructed path of vertical and horizontal egress travel from any occupied portion of a building or structure to a public way....
-
MEANS OF EGRESS
A continuous and unobstructed path of vertical and horizontal egress travel from any occupied portion of a building or structure to a public way....