Signs that are designed to be read by touch should not have sharp or abrasive edges. ◼...
Search Results "Franchise Design"
-
11B-703.2 Raised characters
-
11B-809.10.3 Powder rooms
Powder rooms shall be designed to comply with Sections 11B-809.7, 11B-809.8, 11B-809.10.5.2, 11B-809.10.6.4, 11B-809.10.7.3, and 11B-809.12....
-
407.2.1.4 Location
The call button that designates the up direction shall be located above the call button that designates the down direction....
-
407.2.1.4 Location
The call button that designates the up direction shall be located above the call button that designates the down direction....
-
407.2.1.4 Location
The call button that designates the up direction shall be located above the call button that designates the down direction....
-
Factors to Consider in Planning For & Administering an ADA Facilities Compliance Plan
Centrally controlled organizations like public entities may take a very different approach to compliance than that taken by decentralized organizations like fast food franchises where a...
-
Van Accessible Signage
spaces over those designed to accommodate vans....
-
4.10.12(2)
The call button for the main entry floor shall be designated by a raised star at the left of the floor designation (see Fig. 23(a))....
-
4.10.12(2)
The call button for the main entry floor shall be designated by a raised star at the left of the floor designation (see Fig. 23(a))....
-
214 Washing Machines and Clothes Dryers
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different New...
-
Accessible Rides
Accessible Rides Each newly constructed or newly designed amusement ride must provide at least one wheelchair space, or at least one ride seat designed for transfer, or a transfer device...
-
11B-225.2.1 Lockers
Different types of lockers may include full-size and half-size lockers, as well as those specifically designed for storage of various sports equipment. ◼...
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-502.7 Relationship to accessible routes
Parking spaces and access aisles shall be designed so that cars and vans, when parked, cannot obstruct the required clear width of adjacent accessible routes....
-
11B-225.2.1 Lockers
Different types of lockers may include full-size and half-size lockers, as well as those specifically designed for storage of various sports equipment. ◼...
-
Van Accessible Signage
The proposed rule removed a requirement that the access designation for van parking include the term "van accessible" to clarify that both car and van drivers can use such spaces, as was...
-
Adaptability
Adaptability Toilet rooms designed for use by a single occupant of a specific space, can be designed to be "adaptable" so that accessible elements can be installed when needed after construction...
-
11B-407.2.1.4 Location
The call button that designates the up direction shall be located above the call button that designates the down direction. Exception: Reserved....
-
Wheelchair
[35.104 & 36.104] A manually-operated or power-driven device designed primarily for use by an individual with a mobility disability for the main purpose of indoor or of both indoor and...
-
11B-405.8 Handrails
[2010 ADA Standards] EXCEPTION: Within employee work areas, handrails shall not be required where ramps that are part of common use circulation paths are designed to permit the installation...
-
11B-405.8 Handrails
[2010 ADA Standards] EXCEPTION: Within employee work areas, handrails shall not be required where ramps that are part of common use circulation paths are designed to permit the installation...
-
11B-104.1.1 Construction and manufacturing tolerances
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
11B-104.1.1 Construction and manufacturing tolerances
Recognized tolerances are not intended to apply to design work. It is good practice when specifying dimensions to avoid specifying a tolerance where dimensions are absolute....
-
APPENDIX A: Federal Trail Data Standards (FTDS) – Trail Fundamentals
11/08/2011 Trail Type ◼ Trail Class ◼ Managed Use ◼ Designed Use The Federal Trail Fundamentals include four concepts that are the cornerstones of effective trail planning...