However, entities should maintain the vertical clearance along the trail tread, resting intervals, and passing spaces free from tree branches for 80 inches high minimum above the ground....
Search Results "Door Maneuvering Clearance"
Filters
Commonly Searched Documents
-
1017.9 Protruding Objects
-
Head Room [4.4.2]
Circulation paths must provide at least 80 inches of vertical clearance. Otherwise, fixed barriers detectable by canes must define areas with less clearance....
-
404.2.8.2 Spring Hinges
Door and gate spring hinges shall be adjusted so that from the open position of 70 degrees, the door or gate shall move to the closed position in 1.5 seconds minimum....
-
7d.
Is no more than 5 pounds force needed to push or pull open the accessible door?...
-
11B-809.8.4 Door signal devices
Every primary entrance to a residential dwelling unit with adaptable features shall be provided with a door buzzer, bell, chime or equivalent....
-
g-iv
Is no more than 5 pounds force needed to push or pull open the door?...
-
Base Support [No specific provision—affects M303.2.4]
The anthropomorphic data, as well as the calculated footrest clearances, are below in Tables 4 and 5. Table 4....
-
Panda S.66 Solid Wood Folding Door System
Product by Panda Windows & Doors - Visit www.panda-windows.com for more information!...
-
Panda S.51 All Aluminum Folding Door System
Product by Panda Windows & Doors - Visit www.panda-windows.com for more information!...
-
LaCantina Doors Industrial Commercial - Best in Show Award Chicago AIA
LaCantina Doors Industrial Commercial Spotlight....
-
M302.4.1 Clearance in Base
The base of the diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum...
-
M302.4.1 Clearance in Base
The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum measured...
-
409.3.1 Power Operation
Elevator car and hoistway doors and gates shall be power operated and shall comply with ANSI/BHMA A156.19 (1997 or 2002 edition) (incorporated by reference, see "Referenced Standards" in...
-
Thresholds [§404.2.5]
These requirements apply to all types of doors required to comply, including sliding doors. Threshold Profile...
-
11B-503.5 Vertical clearance
spaces, access aisles serving them, and a vehicular route from an entrance to the passenger loading zone and from the passenger loading zone to a vehicular exit shall provide a vertical clearance...
-
Panda S.85 Slim Profile Lift & Slide Patio Door Video
-
§ 38.107(a)(5)
Door latches and hardware shall be operable with one hand and shall not require tight grasping, pinching, or twisting of the wrist....
-
Appendix 3 - Comparison of US Standards to IDEA Center Research
       Knee Clearance Height (KCH) 685...
-
11B-207.1 General
Doors that provide access only to interior or exterior stairways shall not be required to comply with Section 11B-404....
-
S.10 All Aluminum Lift & Slide Door System Corner Detail
Product by Panda Windows & Doors....
-
S.12 Solid Wood Lift & Slide Door System Corner Detail
Product by Panda Windows & Doors....
-
Panda TS.83 Thermally Broken Multi-Slide Door System
Product by Panda Windows & Doors - Visit www.panda-windows.com for more information!...
-
Panda S.81 All Aluminum Multi-Slide Door System
Product by Panda Windows & Doors - Visit www.panda-windows.com for more information!...
-
Panda TS.19 Thermally Broken Lift & Slide Door System
Product by Panda Windows & Doors - Visit www.panda-windows.com for more information!...
